Liebert NXL installation manual Front View

Installation Drawings

Figure 4 Bottom cable entry routing and installation order

	DC (POSITIVE)
	DC (NEGATIVE)		DC (POSITIVE)
	GROUND (TOP ENTRY)
			DC (NEGATIVE)
	BYPASS NEUTRAL		BYPASS NEUTRAL
FAULT BRACE		FAULT BRACE	BYPASS INPUT
		BYPASS INPUT
			(PHASE C)
BYPASS INPUT	BYPASS INPUT
		FAULT BRACE	RECTIFIER INPUT
FAULT BRACE	RECTIFIER INPUT		(PHASE C)
RECTIFIER INPUT	RECTIFIER
	INPUT	FAULT BRACE	OUTPUT (PHASE C)
FAULT BRACE		OUTPUT
OUTPUT	OUTPUT
	GROUND (BOTTOM ENTRY)		OUTPUT NEUTRAL
	OUTPUT NEUTRAL

OUTPUT CONDUIT

INPUT CONDUIT

	BYPASS CONDUIT
FRONT VIEW	DC CONDUIT
	SIDE VIEW

Recommended order of installation for cables: 1.) Output Neutral

2.) Output Power (Phases A-B-C)

3.) Rectifier Input Power (Phases A-B-C)

4.) Bypass Input Power (Phases A-B-C)

5.) Bypass Neutral

6.) DC Power

7.) Ground

The cables must be routed around the fault braces. This is to prevent the cables from coming in contact with

other busbars.

12