Liebert 2700VA, 208V user manual RACK-MOUNT UPS Conversion and Installation

Page 13

RACK-MOUNT UPS CONVERSION AND INSTALLATION

NOTE

When rack mounted, the UPS must be supported by a shelf, brackets or slide rails on each side. The rack mount handles WILL NOT support the weight of the UPS. They are used to move the UPS into and out of the rack.

1.For slide rail installations, first remove the top/side fin. Slide the top/side fin forward, then lift it up to remove. If desired, install the optional rack mount handles that were shipped with the UPS.

U

 

 

PStation GXT

 

– +

 

 

AC INPUT

BATTERY UPS ON

 

 

BYPASS

 

 

Optional rack mount handles

Securing hardware and slide rails are sold separately. Contact your local dealer or Liebert representative for these additional options and any assistance needed.

2. Unpack the two (2) rack-

 

mounting bracket assemblies

 

and mounting hardware from

Retaining

the rack-mounting kit

(P/N: RMKIT18-32). Bracket

latches

 

assemblies are interchange-

 

able between left-hand or

 

right-hand. Remove inner

 

member of each bracket

 

assembly as shown at right by

Inner

extending it to its outermost

position, depressing the

members

retaining latch and then pulling

 

inner member from bracket

 

assembly.

 

Return flanges

Rear members

Front members

9

Image 13
Contents UPStation GXT 2U Page Table of Contents Configuration Program Important Safety Instructions Page Glossary of Symbols Introduction Major Components RECTIFIER/POWER Factor Correction PFC CircuitInverter Battery Battery ChargerDC to DC Converter Dynamic BypassGXT 2U Rear View Tower UPS Installation InstallationPreparation RACK-MOUNT UPS Conversion and Installation Page Prepare the UPS or battery cab Inet the equipment for rack UPS External Battery Cabinet Installation ON/Alarm Silence/Manual Battery Test Button Controls and IndicatorsFault Indicator LED Red Load/Battery Level Indicators 4 Green, 1 AmberBypass Indicator LED Amber UPS on Indicator LED GreenOutput Voltage Selection AC Input Indicator LED GreenBypass Mode Operation Normal Mode OperationBattery Mode Operation Operating InstructionsBattery Recharge Mode Communications Pins 4 & 5 Remote Shutdown on BatteryCommunications Interface Port Auto-Enable Output Pin 6 Logic Pins 5 & 6 ANY-MODE ShutdownUPS Intelligent Communications GXT 2U Configuration Program Abilities Configuration ProgramWhat You Will Need Battery Replacement MaintenanceInternal Battery Replacement Procedures LED status Diagnosis/Audible alarm TroubleshootingProblem Cause Solution Troubleshooting GuideRoom ambient temperature That the bypass is Condition Alarm Alarm ConditionsDimensions in. mm SpecificationsDimensions in mm Battery Cabinet SpecificationsLoad % Estimated Time Battery RUN TimesProduct Warranty Registration Page Page UPStation GXT 2U

208V, 2700VA specifications

The Liebert 2700VA, 208V is a robust and reliable uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disturbances. This UPS is ideal for various applications, including data centers, telecommunications, and manufacturing environments, ensuring that business continuity is maintained even in the face of power outages or fluctuations.

One of the primary features of the Liebert 2700VA is its high power rating of 2700VA, which makes it suitable for supporting a range of devices, from servers to sensitive electronic equipment. With a nominal output voltage of 208V, it meets the electrical requirements of many industrial and commercial systems, making it an adaptable choice for enterprises with diverse power needs.

The Liebert 2700VA is equipped with advanced technologies that enhance its performance and efficiency. The unit employs double-conversion online technology, which ensures that the output power is consistently clean and stable. This technology continuously converts incoming AC power into DC and then back to AC, providing a seamless transition to battery power during an outage, eliminating any momentary interruptions.

In terms of characteristics, the Liebert 2700VA features an LCD display that provides real-time information on the UPS’s status, including input/output voltage, load level, and battery condition. This user-friendly interface allows for easy monitoring and management, making it convenient for IT professionals to maintain optimal operations.

Another significant aspect of the Liebert 2700VA is its advanced battery management system. This feature optimizes battery performance and life by regulating charging cycles and ensuring that batteries are in peak condition when needed. Furthermore, the UPS offers multiple communication options, including USB and serial connectivity, enabling integration with monitoring software and allowing for remote management capabilities.

The Liebert 2700VA also comes equipped with a range of protection features, including overload protection, short-circuit protection, and surge suppression. These attributes safeguard connected equipment from electrical anomalies, providing peace of mind in environments where downtime can be costly.

In conclusion, the Liebert 2700VA, 208V is a powerful UPS solution that combines advanced technology with essential features, making it a crucial asset for businesses seeking reliable power protection. Its robust capabilities, user-friendly interface, and extensive protection measures position it as an ideal choice for ensuring operational continuity in various critical applications.