Liebert 1000 - 3000VA 60 Hz 120V Rack-Mount UPS Conversion and Installation, Rack mount handles

Page 16

Installation

5.3Rack-Mount UPS Conversion and Installation

NOTE

When rack mounted, the UPS must be supported by a shelf, slide rails, brackets or fixed rails on each side. The rack mount handles WILL NOT support the weight of the UPS. They are used to move the UPS into and out of the rack.

1.For fixed rail installations, install the rack mount handles using four (4) M4x6 screws (see Figure 8).

Figure 8 Rack mount handles

Two (2) M4x6

Flat Head Screws

Two (2) M4x6

 

 

Flat Head Screws

Rack Mount Handles

M4x6 Flat Screw

 

 

2.Unpack the two fixed rail assemblies and mounting hardware. Loosen the wing nuts and extend the inner members to their outermost position (see Figure 9).

Figure 9 Fixed rails with inner members extended

Wing Nuts for

Adjustment

Adjustable Length

Maximum 800 mm

Minimum 485 mm

! CAUTION

Adjustable Slide Assembly

Reduce the risk of tipping the rack enclosure by placing the UPS or battery cabinet in the lowest possible rack position.

3.Determine the height position inside the rack enclosure where you want to mount the UPS or battery cabinet. Make sure fixed rails are at the same mounting height on each of the four (4) rack mounting rails.

10

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Liebert PowerSure PSI Page Table of Contents Product Warranty Registration CommunicationsFigures Page Important Safety Instructions Safety PrecautionsBattery Handling Precautions Glossary of Symbols Introduction Front view of UPS3000VA PSI-rear view Relay Major ComponentsBattery Charger BatteryAutomatic Voltage Regulator Inverter-1000/1440 Models OnlyWHAT’S Included Installation Tower UPS InstallationPreparation Rack-Mount UPS Conversion and Installation Rack mount handlesRack mounting rails and slide assemblies Option 1 Serial Communications External Battery Cabinet Installation Repo switch connectionsControls and Indicators ON/Alarm Silence/Battery Test ButtonOFF Button Load Level Indicators-4 green, 1 amber Battery Level Indicators-5 greenAC Input Indicator-Green Buck/Boost Indicator-GreenOver Temp Indicator-Amber Fault Indicator-RedBuck/Boost Mode Normal ModeModes of Operation Battery Mode Battery Recharge OperationRemote Shutdown Via the DB-9 Connector DB-9 ConnectorCommunications USB Interface Port Data Line Protection ConnectorsUPS Intelligent Communications Voltage Programming Procedure Utility power will be applied to the connected loadCleaning the UPS Battery ReplacementMaintenance Maintaining BatteriesInternal Battery Replacement Procedure Troubleshooting Status indicatorsTroubleshooting chart Problem Cause Solution Specifications UPS specificationsBattery cabinet specifications Battery run times Product Warranty Registration Nic Site

1000 - 3000VA 60 Hz 120V specifications

The Liebert 1000 - 3000VA 60 Hz 120V is an uninterruptible power supply (UPS) designed to protect critical electronic equipment and ensure uninterrupted operation in various settings. Ideal for small to medium-sized businesses, the Liebert UPS offers reliable power protection with its compact and efficient design.

One of the main features of the Liebert 1000 - 3000VA is its advanced battery technology. Equipped with high-performance sealed lead-acid batteries, this UPS ensures long-lasting power backup while requiring minimal maintenance. The smart battery management system intelligently monitors battery health, extending overall battery life while providing precise notifications for replacement, thus optimizing operational efficiency.

Another critical characteristic is its online double-conversion technology. This feature provides consistent and clean power by converting incoming AC power to DC and then back to AC again. This process effectively eliminates any electrical noise or power fluctuations, protecting sensitive electronics from interruptions or damage caused by power surges, spikes, or drops. As a result, workloads can operate without concern for potential power issues.

The Liebert UPS is designed with user-friendliness in mind. Featuring a clear LED display, it allows users to easily monitor performance metrics such as load level, battery health, and runtime status. In addition, the intuitive control panel simplifies operation and navigation through settings, making it accessible to users without extensive technical knowledge.

This UPS also offers flexibility with multiple outlet options. The Liebert 1000 - 3000VA includes a combination of NEMA outlets, providing compatibility with various equipment types, from servers and routers to networking devices and communications equipment. This versatility ensures that it meets diverse power requirements within any environment.

Moreover, the compact form factor enables installation in tight spaces while maintaining robust performance. Its efficient design facilitates heat dissipation, ensuring optimal operation without overheating.

The Liebert 1000 - 3000VA 60 Hz 120V UPS delivers excellent protection for critical equipment across various industries, including telecommunications, healthcare, and finance, ensuring operational continuity. With its advanced features, reliable technologies, and user-centered design, it stands out as a reliable choice for any organization seeking to safeguard its power supply infrastructure.
Top Page Image Contents