Liebert 1000 - 3000VA 60 Hz 120V user manual Battery Handling Precautions

Page 8

! CAUTION

BATTERY HANDLING PRECAUTIONS

Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and required precautions. Keep unauthorized personnel away from the batteries.

A battery can present a risk of electrical shock and high short-circuit current. The following precautions should be observed when working on batteries:

•Remove watches, rings, and other metal objects.

•Use tools with insulated handles.

•Do not dispose battery or batteries in a fire. The battery may explode.

•Do not open or mutilate the battery or batteries. Released electrolyte is harmful to skin and eyes. It may be toxic.

•When replacing the battery, use same number and type of battery as the suitable recom- mended type of battery listed in specification table in back of this manual.

•Handle, transport and recycle batteries in accordance with local regulations.

NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment uses, generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the UPS and the receiver.

•Connect the UPS into an outlet on a circuit different from the one on which the receiver is connected.

2

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Liebert PowerSure PSI Page Table of Contents Product Warranty Registration CommunicationsFigures Page Important Safety Instructions Safety PrecautionsBattery Handling Precautions Glossary of Symbols Introduction Front view of UPS3000VA PSI-rear view Relay Major ComponentsBattery Charger BatteryAutomatic Voltage Regulator Inverter-1000/1440 Models OnlyWHAT’S Included Preparation Tower UPS InstallationInstallation Rack-Mount UPS Conversion and Installation Rack mount handlesRack mounting rails and slide assemblies Option 1 Serial Communications External Battery Cabinet Installation Repo switch connectionsOFF Button ON/Alarm Silence/Battery Test ButtonControls and Indicators Load Level Indicators-4 green, 1 amber Battery Level Indicators-5 greenAC Input Indicator-Green Buck/Boost Indicator-GreenOver Temp Indicator-Amber Fault Indicator-RedModes of Operation Normal ModeBuck/Boost Mode Battery Mode Battery Recharge OperationCommunications DB-9 ConnectorRemote Shutdown Via the DB-9 Connector UPS Intelligent Communications Data Line Protection ConnectorsUSB Interface Port Voltage Programming Procedure Utility power will be applied to the connected loadCleaning the UPS Battery ReplacementMaintenance Maintaining BatteriesInternal Battery Replacement Procedure Troubleshooting Status indicatorsTroubleshooting chart Problem Cause Solution Specifications UPS specificationsBattery cabinet specifications Battery run times Product Warranty Registration Nic Site

1000 - 3000VA 60 Hz 120V specifications

The Liebert 1000 - 3000VA 60 Hz 120V is an uninterruptible power supply (UPS) designed to protect critical electronic equipment and ensure uninterrupted operation in various settings. Ideal for small to medium-sized businesses, the Liebert UPS offers reliable power protection with its compact and efficient design.

One of the main features of the Liebert 1000 - 3000VA is its advanced battery technology. Equipped with high-performance sealed lead-acid batteries, this UPS ensures long-lasting power backup while requiring minimal maintenance. The smart battery management system intelligently monitors battery health, extending overall battery life while providing precise notifications for replacement, thus optimizing operational efficiency.

Another critical characteristic is its online double-conversion technology. This feature provides consistent and clean power by converting incoming AC power to DC and then back to AC again. This process effectively eliminates any electrical noise or power fluctuations, protecting sensitive electronics from interruptions or damage caused by power surges, spikes, or drops. As a result, workloads can operate without concern for potential power issues.

The Liebert UPS is designed with user-friendliness in mind. Featuring a clear LED display, it allows users to easily monitor performance metrics such as load level, battery health, and runtime status. In addition, the intuitive control panel simplifies operation and navigation through settings, making it accessible to users without extensive technical knowledge.

This UPS also offers flexibility with multiple outlet options. The Liebert 1000 - 3000VA includes a combination of NEMA outlets, providing compatibility with various equipment types, from servers and routers to networking devices and communications equipment. This versatility ensures that it meets diverse power requirements within any environment.

Moreover, the compact form factor enables installation in tight spaces while maintaining robust performance. Its efficient design facilitates heat dissipation, ensuring optimal operation without overheating.

The Liebert 1000 - 3000VA 60 Hz 120V UPS delivers excellent protection for critical equipment across various industries, including telecommunications, healthcare, and finance, ensuring operational continuity. With its advanced features, reliable technologies, and user-centered design, it stands out as a reliable choice for any organization seeking to safeguard its power supply infrastructure.
Top Page Image Contents