LevelOne IPS-0008 user manual Using the control buttons, Remote control mode

Page 12

1.3.3.Using the control buttons

You can turn on power manually for each of the eight output devices with the control buttons provided under each status indicator A through H. Each button allows you to set the remote control function as well as turn power on/off for each outlet manually.

The control button has two modes of operation. Press the button repeatedly to switch between Remote Control mode and Power On/Off mode. When you press the control button, the IPS-0008 switches modes as follows:

After switching modes, you need to press the control button again within 5 seconds to change the mode status.

Remote control mode

1.Press the control button once. The remote control indicator starts flashing red.

2.Now press control button again within 5 seconds and hold for more than 5 seconds. The remote control indicator starts flashing red at a faster speed and then inverts its original state.

For instance, if remote control indicator is enabled (grey) before you press the control button, it turns on (red) after step 2, indicating that remote control is disabled.

8

Image 12

Contents IPS-0008 IP Power Switch User Manual Preface About this manualCopyright information Safety instructions Table Content USING THE CONSOLE MENUUSING THE WEB INTERFACE 1. Introduction 1.1. Features 1.2. Package contents 1. IPS-0008 IP Power Switch 2. Rack-mount Brackets 3. U-type Handle8. Rubber Feet 9. Quick Installation Guide 10. Power Cord 4. U-type Handle Screws 5. Bracket Screws 6. Feet Screws 7. CD Manual1.3. Hardware Components 1.3.1. Front PanelComponent DescriptionComponent 1.3.2. Status Indicator Status IndicatorCurrent level indicator Outlet power indicatorInput power consumption 1.3.3. Using the control buttons Remote control modePower on/off mode 1.4. Rear Panel220AC Model 110AC Model Rear Panel Component 2. Getting Started 2.1. Attaching the feet2.2. Attaching the ears 2.3. Making Connections Page 2.4. Connecting Input Power 2.5. Connecting Output Devices 2.6. Connecting digital outputs2.7. Connecting EMD 2.8. Connecting The Console 2.9. Connecting To a WAN 3. Using the Console Menu 3.1. Using HyperTerminalPage The main menu options are displayed 3.2. Navigating Through the Console Menu The console menu consists of the following submenus 3.3. Setting the IP Address 4. Using the Web Interface 4.1. Overviewƒ Each menu page provides online help to assist you in configuring 4.2. Modifying the Basic Settings 4.2.1. Setting the Date and Time4.2.2. Adding Users 4.2.3. Changing Event Alert Settings Page 4.3. Modifying Application Settings 4.3.1. Setting Control Options4.3.2. Setting Up a Schedule 4.3.4. Configuration 4.3.3. StatusPage 4.4. Power Cycle Specifications Power Input/OutputDimensions and Weight AppendixError codes Error code DescriptionRegulatory information FCC Statement