LevelOne IPS-0008 user manual Modifying Application Settings, Setting Control Options

4.3. Modifying Application Settings

The following sections describe how to use the Power Management and Environment menus to control the system input and output ports, as well as view the status of the EMD.

4.3.1.Setting Control Options

Click Control under Power Management to display the control options for the power and digital outputs.

The Control page shows a graphical representation of the rear panel along with a tabular representation of the status of each power outlet A through H and digital out- puts. Hover your mouse cursor over the inlet or any of the outputs and click to configure them as follows:

ƒInlet: Specify what action is taken by the IPS-0008 when the inlet voltage is not within limits. You can set which power outlets and digital outputs are to be turned on or off when the inlet voltage is not of acceptable value.

ƒPower Status of Outlet: Configure the parameters to identify the out- let, specify its power on/off delay, and output current threshold. You can also manually turn the outlet on/off from this menu page.

ƒDigital Output Status: This menu page shows the status of the both digital outputs and lets you specify which digital output is toggled when events occur. You can also manually change the status of both digital outputs from this menu page.

31