3. Using the Console Menu
The IPS-0008 is provided with a serial port that enables you to configure and control the system through your PC’s RS-232 serial (COM) port. Use the serial cable provided to connect the console port to your PC’s COM port as described in “Connecting the console” on page 15. This section describes how to use a console application to control the IPS-0008 and configure its settings such as its IP address, outlet control parameters, access control table, and trap receivers table.
3.1. Using HyperTerminal
HyperTerminal is a console application in Windows that enables you to con- figure or control a device through command line parameters. You can con- figure the IPS-0008 parameters and its outlets through simple numerical commands from your keyboard. You can also use Telnet or any other con- sole application for controlling the device in a similar manner.
Follow these steps to start HyperTerminal and communicate with the IPS-0008:
1.To start HyperTerminal, click Start, Programs, Accessories, Communications, and HyperTerminal from the Windows Start button.
2.A New Connection opens. Type a name for the connection in the Name field and select an icon for the connection. Click OK when done.