Lantronix 900-603 Setting Real Time Clock, Assigning a Static IP Address to the xPrintServer

4: Configuration

Setting Real Time Clock

Real Time Clock is a built-in function in xPrintServer which time-stamps printing-related activities such as identifying the time of log activities or print jobs. Real Time Clock is automatically on and syncs time with pool.ntp.org (Network Time Protocol) and is set it at GMT -800 PST (Pacific Standard Time).

To modify the Time-zone

1.Login to the xPrintServer user interface (see Logging In) as the Admin user.

2.Click the Admin tab to access the Admin menu. A list of all available Admin user configuration options appears to the left of the screen (see Figure 4-5).

The Select Time-zonepage is the default page the Admin user the Admin tab. This page can also be accessed by clicking the side of the Admin page.

will get to upon clicking on Time-zonelink on the left

Figure 4-5 Admin Menu (Defaults to Time-zone Link)

3.Click the Time-zonelink on the left side of the page to access the Select Time-zonepage.

4.Select a new time zone from the Select Time-zonedrop-down menu.

5.Click the Change Time-zonebutton.

6.Click Yes in the confirmation popup that appears.

7.Wait 35 seconds. When the time zone is changed, the xPrintServer device will automatically restart, bringing you back to System Status on the Home Page. The unit is now set to your new chosen time zone.

Assigning a Static IP Address to the xPrintServer

Your xPrintServer IP address is DHCP by default, but can be configured with a static IP address. The Admin user may utilize these instructions to establish a static IP address.

1. Login to the xPrintServer user interface (see Logging In) as Admin user.

xPrintServer User Guide 23