Speed/Disable:
This setting has six
Flow Control:
This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to Enable for avoiding data transfer overflow. Or it sets to Disable; there is either no flow control or other hardware/software management.
When the 10/100M port is set to full duplex mode, then the flow control will automatically set to disable; and if the 10/100M port is set to half duplex mode, the flow control will automatically set to enable.
Bandwidth Control Ingress/Egress rate:
This Switch support the Port Bandwidth Rate Control, and will work only on the auto mode.
VLAN Settings (Virtual Local Area Network)
A VLAN is a collection of switch ports that make up a single broadcast domain. You can configure a VLAN for a single switch, or for multiple switches. When you create a VLAN, you can control traffic flow and ease the administration of moves, adds, and changes on the network, by eliminating the need to change physical cabling.
On VLAN settings, there are two main settings, VID Table Setting and Port VLAN Setting.
26