Lennox Hearth D2 warranty LaCie d2 Scsi AIT Drive Getting to Know Your AIT Drive

LaCie d2 SCSI AIT Drive	Getting to Know Your AIT Drive
	page 8

6 – Lock Slot - This slot is used to connect a Kensington-type anti-theft system for maximum protection. Refer to your anti-theft system documentation for details on how to connect the lock.

7 – Rackmount Grooves - For mounting your drive with the rackmount kit (sold separately).

8 – Serial Number Sticker

This is where you will find your LaCie drive's serial number. Write down the serial number and keep it in a safe place, because you will need to provide the number in the event you have to call LaCie Technical Support for any reason in regard to the drive’s performance. The serial number would also come in handy if your drive is lost or stolen.

6

8	7
7

1

Side View

1 – Rackmount Grooves - Used for mounting the drive’s

stand and for mounting your drive with the rackmount kit (sold separately).

2.3 SCSI Cables and Connectors

LaCie AIT drives are supplied with the following 68-pin to 68-pin SCSI interfaces: AIT1 – Ultra2 LVD; AIT2 – Ultra2 LVD; and AIT3 – Ultra160 LVD (also included with each of the drives is an LVD terminator). If the SCSI cable supplied with your LaCie AIT drive does not meet your requirements, please contact your computer supply specialist, who will be able to help you choose the right SCSI cable for your particular setup and applications.

68-pin SCSI connector