LevelOne GSW-2401TX, GSW-1601TX user manual Twisted-Pair Ports, AC Power Connector

Page 10

2 Port 10/100/1000T Gigabit Module

Front Panel

2 Port 1000SX Gigabit Fiber Module

Front Panel

LED Indicator Panel

Refer to the next chapter for detailed information about each of the switch’s LED indicators.

Twisted-Pair Ports

Use any of these ports to connect stations or hubs to the switch. These ports are MDI-X ports, which means you can use ordinary straight-through twisted-pair cable to connect the switch to PCs, workstations, or servers through these ports. If you need to connect to another device with MDI-X ports such as another switch or hub, you should use a crossover cable, or connect using the Uplink port (described below).

Rear Panel

16/24 Port 10/100/1000Mbps Switch with Gigabit option

AC Power Connector:

For the power cord.

4

Image 10

Contents Vision FCC Class a Appliance Contents Troubleshooting Package List Page Features Page 24Port 10/100Mbps Switch with Gigabit option Port 10/100Mbps Switch with Gigabit optionPort 10/100Mbps Switch front panel AC Power Connector Twisted-Pair PortsReset Switch LED IndicatorsConnecting End node or Hub or Switch Connecting to Network Backbone or Server Power LEDFull/ Half Duplex and Collision LED Link/ Speed LEDLabel L10/ L100/ L1000 TX ActivityConnect to PC RS-232 serial cable Hyper TerminalMain Menu Speed Mode Page Address Learn Vlan Type ‘S’ or ‘s’ than input ‘2’ ,press Enter Select c Please Wait Queues Priority Trunk Select Type ‘A’ or ‘a’ three times to assigned trunk port memberType ‘E’ or ‘e’ return to main menu Uplink Port Input ‘1’ and press EnterType ‘C’ or ‘c’ to continue Select 16-P 10/100M + 2-P 1GCOOPER Module ver3.12 UpLink Group 2 ,assigned ports Monitor Port Type ‘E’ or ‘e’ back to main menu View Configuration Restore To Factory Default Learning Switch OperationAddress Table Forwarding & FilteringStore-and-Forward Auto-NegotiationTroubleshooting SolutionEchnical Specifications RJ-45 P in Specification RJ-45 Connector pin assignment