LevelOne GSW-2401TX, GSW-1601TX user manual Address Learn

Page 18

Address Learn

Entry:

Select “1” from Main Menu. Purpose:

A port’s MAC address register is cleared on power-up, or hardware reset. If this item is enabled, the dynamically learned SA will be leared if it is not refreshed in less than the aging time.

Default:

Enable with aging time 5 minutes.

Select :>> 1

Aging Control

[E]Enable

[D]Disable

Example : Enable aging control with aging time 2 minutes.

1. type ‘E’ or ‘e’ to enable aging control

Select :>> e

Max address-aging timer

Max aging time (1 - 10 minute)...

2. input ‘2’ for aging time and back to main menu

12

Image 18

Contents Vision FCC Class a Appliance Contents Troubleshooting Package List Page Features Page Port 10/100Mbps Switch with Gigabit option 24Port 10/100Mbps Switch with Gigabit optionPort 10/100Mbps Switch front panel AC Power Connector Twisted-Pair PortsLED Indicators Reset SwitchConnecting End node or Hub or Switch Connecting to Network Backbone or Server Power LEDFull/ Half Duplex and Collision LED Link/ Speed LEDLabel L10/ L100/ L1000 TX ActivityConnect to PC RS-232 serial cable Hyper TerminalMain Menu Speed Mode Page Address Learn Vlan Type ‘S’ or ‘s’ than input ‘2’ ,press Enter Select c Please Wait Queues Priority Trunk Select Type ‘A’ or ‘a’ three times to assigned trunk port memberType ‘E’ or ‘e’ return to main menu Uplink Port Input ‘1’ and press EnterType ‘C’ or ‘c’ to continue Select 16-P 10/100M + 2-P 1GCOOPER Module ver3.12 UpLink Group 2 ,assigned ports Monitor Port Type ‘E’ or ‘e’ back to main menu View Configuration Restore To Factory Default Learning Switch OperationAddress Table Forwarding & FilteringStore-and-Forward Auto-NegotiationTroubleshooting SolutionEchnical Specifications RJ-45 P in Specification RJ-45 Connector pin assignment