Lantronix 4092A IRIG-B manual Assigning a Static IP Address, To set up the 4092A

Page 10

„Rack mounting screws.

„Screwdriver for the rack mount screws and slide, as needed.

Caution

Since the unit does not have a AC mains power switch, both the appliance inlet connector and the plug on the detachable power supply cord are considered to be suitable disconnect means for disconnecting the unit from the AC mains supply. If the rear of the unit is not accessible after installation in the instrument rack, you must provide a suitable external AC disconnect means for the unit.

To set up the 4092A:

1.Unpack carefully and inspect the 4092A.

2.Check for physical damage.

„If you observe physical damage, immediately contact Timing Solutions and the carrier.

„We recommend saving the shipping container for submitting any necessary claims to the carrier.

3.Using a #1 Phillips screwdriver and a #6-32 pan head screw, connect a safety ground wire to the safety ground point next to one power supply.

4.Plug the female end of the power cord into the male IEC-320 plug on the rear of each power supply.

5.Plug the male end of each power cord into a 100–240 VAC, 50/60 Hz power source.

Caution

Ensure that this power supply cord is connected to a properly grounded mains receptacle.

6.Connect the input signal cables from the desired signal source to the INPUT A and INPUT B BNC connectors on the rear panel.

7.Connect up to eight cables to the OUTPUT BNC connectors on the rear panel to supply users with a copy of the input signal.

8.(Optional.) Connect a shielded LAN cable to the Ethernet port on the rear panel of the 4092A.

„For information about configuring the network connection, see “2.3 Assigning a Static IP Address” on page 6.

2.3Assigning a Static IP Address

The 4092A contains a Lantronix® Xport™ Ethernet to RS-232 converter, which provides the 4092A’s Ethernet connection.

The 4092A ships from the factory with a default IP address of 0.0.0.0, which enables DHCP. If the network has a DHCP server, it will assign each unit an IP address, gateway address, and subnet mask when the unit starts up.

6

2: Installing and Setting Up the 4092A

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Walnut Street Suite 1B Boulder, CO Phone 303 Revision Description Date Approved Contents Glossary Index Symbol Definition SymbolsIntroduction Conventions About This ManualConvention Definition AC Power Ethernet 4092A OverviewIntroduction Safety Information Installing and Setting Up the 4092AInstalling the 4092A To set up the 4092A Assigning a Static IP Address4092A Operations and Maintenance Manual To select the active input channel from the front panel To assign the static IP address using TelnetSelecting the Active Input Channel To select the active input channel remotelyTo set the 4092A to autoswitch mode from the front panel Setting the 4092A to Autoswitch ModeCleaning To set the 4092A to autoswitch mode remotelyInstalling and Setting Up the 4092A Monitoring the 4092A Accessing the SystemChecking Status and Alarms Checking System InformationDefines each status or alarm bit position Command sent 4092A response To check the TSC model number Checking Model Number and Software VersionTo check the software version Understanding Alarm Output Monitoring the 4092A Troubleshooting Input Problems Troubleshooting the 4092AInput LED status What it means What do to Power LED status What it means What do to Troubleshooting Output ProblemsTroubleshooting Power Supply Problems Input Select LED status What it means What do toConfiguring for Dual Power Supplies Configuring for Input Signal and ImpedanceTo change the jumper settings Replacing Power Supplies To change the jumper settingReplacing Fuses Verifying Operational ProblemsTo replace a power supply To replace a fuseTroubleshooting the 4092A Shipping Information Warranty and Shipping InformationWarranty Information Packing InstructionsWarranty and Shipping Information Electrical Specifications Appendix a SpecificationsSpecification Environment Specifications Physical SpecificationsTemperature Relative Humidity Altitude Glossary Glossary Index NumericsIndex

4092A IRIG-B specifications

The Lantronix 4092A IRIG-B is a high-performance time code generation and distribution module that plays a crucial role in various applications requiring precise time synchronization. This compact device is particularly beneficial in systems such as telecom infrastructure, military applications, satellite communications, and scientific research. Its core functionality revolves around generating and managing the IRIG-B time code, a standard used for accurately transmitting time information.

One of the primary features of the Lantronix 4092A is its versatility in time code generation. It supports both unidirectional and bidirectional protocols, allowing for seamless integration into existing systems. The module can generate multiple IRIG-B formats, ensuring compatibility with a wide range of time synchronization devices. This flexibility is a significant advantage, particularly in environments that utilize various time code standards.

The device employs advanced timekeeping technology that ensures high accuracy and stability. Equipped with a GPS input option, the 4092A can synchronize its time code with GPS signals, obtaining precise time data globally. This feature is essential for applications that demand synchronization across extensive networks and geographical locations.

In terms of connectivity, the Lantronix 4092A IRIG-B offers multiple options, including RS-232 and RS-485 interfaces. This variety enhances its compatibility with various systems and makes installation straightforward. Additionally, the module is designed for easy integration, enabling developers to embed it within existing hardware architectures without significant modifications.

The 4092A also boasts user-friendly configuration capabilities. Its setup can be managed through a serial interface, allowing users to define parameters and adjust settings with ease. This feature ensures that the device can be quickly tailored to meet the specific needs of the application, minimizing downtime during deployment.

In conclusion, the Lantronix 4092A IRIG-B is an essential module for any application that requires robust time synchronization. Its main features, including versatile time code generation, advanced timekeeping technology, multiple connectivity options, and user-friendly configuration, make it an outstanding choice for industries where precision timing is critical. With its reliability and adaptability, the 4092A is poised to meet the challenges of modern time-sensitive applications.
Top Page Image Contents