Kathrein DCM 32, DCM 42 I manual Preconditions, Connections

Installation

Preconditions

For operation of the cable modem the following conditions need to be satisfied:

Broadband cable connection with backward channel,

Network-compatible PC (Ethernet 10/100Base-T or USB 1.1).

Connections

When connecting the cable modem, follow the steps below in order, see wiring diagram on page 29.

•Connect the RF input (2) of the modem to the antenna socket. Make certain beforehand that the socket has backward channel capability, e.g. Kathrein ESM 30.

•For the connection use a coaxial cable with F- type connector plugs.

•The connecting cable must have CE confor- mity and exhibit a shielding factor in compli- ance with class A of >85 dB (e.g. Kathrein ETG 15 / ETG 30).

•Connect the power adapter to the D.C. volt- age input (1) - DC IN 12 V - and to the mains supply.

Use a) the Ethernet or b) the USB connection.

a)Connect the 10/100Base-T Ethernet connec- tions with one another.(Western socket) of your PC and those of the cable modem (3).

b)Read the readme file on the USB Driver CD- ROM and make sure that your operating sys- tem is supported. When installing the USB connection (4) follow the instructions from the Readme file.

Get in touch with your relevant cable network

24