Intellinet Network Solutions 502566 manual Hardware Installation, Front Panel, Rear Panel

Page 9

3. HARDWARE INSTALLATION

FRONT PANEL

Front Panel

Power — This indicator lights green when the hub is receiving power; otherwise it is off.

Status — This indicator blinks green when the router is working. If it stays on or off, the router is not working.

WAN (Link/ACT) — This indicator lights green when the WAN port has been connected to an xDSL/cable modem successfully. It blinks green while the WAN port is transmitting or receiving data on the xDSL/cable modem.

WLAN (ACT) — This indicator lights green when there are wireless devices connected and transmitting data to the router.

Local Network (Link/ACT) — These indicators light green when the LAN ports have been connected successfully. They blink green while the LAN ports are accessing data.

REAR PANEL

Rear Panel

Antenna — There is one 2dBi gain antenna for wireless connection.

LAN (1-4) — Four RJ-45 10/100Mbps Auto-MDIX ports are for connecting to either 10Mbps or 100Mbps Ethernet connections.

WAN — There is an RJ-45 10/100Mbps Auto-MDIX port for the WAN that accommodates the xDSL/cable modem.

DC IN (POWER JACK) — Plug the power adapter into this power jack.

RESET — Use a pin-shaped item to push in to reset the device to factory default settings. It will be useful when the login password is forgotten; and will reset to default settings.

HARDWARE INSTALLATION

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Regulatory Notes Statements Wireless LAN, Health and Authorization for UseExport Restrictions Contents About This Manual PurposeOverview of This Manual Applications IntroductionFeatures Unpacking and Setup SetupUnpacking Hardware Installation Front PanelRear Panel Connecting the router Checking the installationHardware Connections Windows 95/98/ME PC Network TCP/IP SettingsWindows 2000/NT Windows XP Login to the Router Through a Wireless LAN ConfigurationLogin to the Wireless Super G Router Using the WEB BrowserSetup Wizard Fixed IP Address Obtain IP automatically Dhcp clientPPPoE with a fixed IP address PPPoE to obtain IP automaticallyPptp L2TP LAN settings Advanced ConfigurationLocal Time Displays the local time and date Wireless WPA/WPA2 Security Disable, WEP, WPA and WPA2Radius Server Status Configuration Configuration Routing Access MAC Filters FiltersIP Filters URL BlockingProtocol Filters Public Port Type the port number on the WAN that DMZ Snmp ManagementEnabled/Disabled Click to enable or disable the Snmp Tools Configuration Technical Specifications GeneralPhysical and Environmental
Top Page Image Contents