Wireless
This screen enables the user to view information about wireless devices that are connected to the Wireless Super G Router.
Connected Time: Displays how long the wireless device has been connected to the LAN via the router.
MAC Address: Displays the device’s wireless LAN interface MAC address.
Routing
This selection enables the user to set how the router forwards data: Static or Dynamic. Routing Table enables the user to view the information created by the router that displays the network interconnection topology.
Static
This enables the user to set parameters by which the router forwards data to its destination if the user’s network has a static IP address.
Network Address: Type the static IP address being used to access the Internet. The ISP or network administrator provides this information.
Network Mask: Type the network (subnet) mask for the network. If a value isn’t entered here, the
network mask defaults to 255.255.255.255. As with Network Address, the ISP or network administrator provides this information.
Gateway Address: Type the gateway address for the network. As with Network Address, the ISP or network administrator provides this information.
Interface: Select an interface — WAN or LAN — to connect to the Internet.
Metric: Select which metric to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the page.
Update: Select one of the entries in the static IP address table at the bottom of the page and, after changing parameters, click “Update” to confirm the changes.
28