Intellinet Network Solutions 502566 manual Enabled/Disabled Click to enable or disable the Snmp

Page 36

Enabled/Disabled: Click to enable or disable the SNMP.

System Name: A name given to the router.

System Location: A description of the location of the router (normally, the DNS name).

System Contact:

A description of the contact information for the person responsible for the router.

Community: The SNMP system name for exchanging SNMP community messages. The name can be used to limit SNMP messages passing through the network. The default name is “public.”

Trap Receiver: Type the name of the destination PC that will receive trap messages.

Remote Management

This screen enables the user to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A username and password are required to perform remote management.

HTTP: Enables the user to set up HTTP access for remote management.

Allow to Ping WAN Port: Type a range of router IP addresses that can be pinged from remote locations.

UPNP Enable: UPNP (or UPnP) is short for Universal Plug and Play, which is a

networking architecture that provides compatibility among networking equipment, software and peripherals. The Wireless Super G Router is a UPnP-enabled router and will only work with other UPnP devices/software. If the user does not want to use the UPnP functionality, selecting “Disabled” can disable it.

Gaming Mode: If the user is experiencing difficulties when playing online games or even certain applications that use voice data, the user may need to enable Gaming Mode for these applications to work correctly. When not

36

CONFIGURATION

Image 36
Contents Model Wireless LAN, Health and Authorization for Use Regulatory Notes StatementsExport Restrictions Contents About This Manual PurposeOverview of This Manual Introduction ApplicationsFeatures Unpacking and Setup SetupUnpacking Hardware Installation Front PanelRear Panel Connecting the router Checking the installationHardware Connections PC Network TCP/IP Settings Windows 95/98/MEWindows 2000/NT Windows XP Configuration Login to the Router Through a Wireless LANLogin to the Wireless Super G Router Using the WEB BrowserSetup Wizard Obtain IP automatically Dhcp client Fixed IP AddressPPPoE to obtain IP automatically PPPoE with a fixed IP addressPptp L2TP Advanced Configuration LAN settingsLocal Time Displays the local time and date Wireless Disable, WEP, WPA and WPA2 WPA/WPA2 SecurityRadius Server Status Configuration Configuration Routing Access Filters MAC FiltersURL Blocking IP FiltersProtocol Filters Public Port Type the port number on the WAN that DMZ Management SnmpEnabled/Disabled Click to enable or disable the Snmp Tools Configuration Technical Specifications GeneralPhysical and Environmental