Kingston Technology KND1610TX, KND2410TX, KND810TX manual Speed-Setting Dip Switches, Port no or

8 Rear Panel

Speed-Setting Dip Switches

The dip switches located on the back of the unit can be used to manually configure ports 7 & 8 (KND810TX & KND1610TX) or port 23 & 24 (KND2410TX) to operate at 10Mbps, 100Mbps, or Auto-negotiation (default). Dip switches in the ‘UP’ position are set to OFF (default). Dip switches in the ‘DOWN’ position are set to ON. For specific speed setting combinations, see Table 1-2 below.

D I P S W I T C H S E T T I N G S	PORT NO. 7 (or 23)		PORT NO. 8 (or 24)
SPEED SETTING	DIP SWITCH 1	DIP SWITCH 2	DIP SWITCH 3	DIP SWITCH 4	EXAMPLE
AUTO-NEGOTIATION	UP = OFF	UP = OFF	UP = OFF	UP = OFF
100MBPS	DOWN = ON	UP = OFF	DOWN = ON	UP = OFF
10MBPS	UP = OFF	DOWN = ON	UP = OFF	DOWN = ON

1 2 3 4

78

PORT NO.

Table 1-2 Dip Switch Settings

OFF
ON	Up = OFF
AUTO	Down = ON
100 Mbps
10 Mbps

Fig. 1-5 Dip Switch Configuration

(KND810TX & KND1610TX)

(NOTE: The Fast EtheRx stackable hubs come equipped with one external fuse and one spare fuse. Both fuses are in a fuse holder located just below the AC power connector on the back of the unit. Both fuses are rated 250V/2A

maximum.)	Fuse (250V, 2A)
	S p a r e
	F u s e
	Fig. 1-6 Fuse(s) Compartment

Kingston Technology Company KND2410TX User’s Guide - Rev. A01