Kingston Technology KND2410TX, KND810TX, KND1610TX manual Design Features

Page 9

Front Panel

3

Design Features

The Fast EtheRx dual-speed hub complies with the full set of repeater basic functions as defined by IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD standards.

Repeater Functions

If any single port senses the start of a valid packet on its receiving line, the dual-speed hub will re-transmit the received data to all other ports on the network. The re-transmission of packets complies with the IEEE 802.3 specification in terms of preamble structure, voltage amplitude, and timing characteristics.

Auto-Negotiation

Auto-Negotiation provides the means of automatically establishing a link by detecting the link capabilities of the connected device on the network to select the best operational mode available (i.e. 10/100Mbps selection)

Receive Jabber Protection

The dual-speed hub uses a Receive Jabber Protection scheme to ensure that the network is not disabled due to reception of excessively long data packets.

Collision-Handling

The dual-speed hub will detect and respond to collision conditions as outlined in the IEEE 802.3 specifications.

Error-Handling

With 100BASE-TX Fast Ethernet, the new error-handling feature prevents sub- standard links from generating streams of false carrier and interfering with other links.

Automatic Port Partitioning / Reconnection

If any of the ports on the dual-speed hub experience excessive collisions, or faulty conditions, that particular port can be partitioned. Once partitioned, the hub will continue to monitor that port. If the error conditions have been corrected or a good data packet is received or transmitted without a collision, the hub will automatically reconnect that port to the network.

KND2410TX User’s Guide - Rev. A01

Kingston Technology Company

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Models KND810TX KND1610TX KND2410TX Page Important Safety Instructions 10/100TX Rack-Mountable Dual Speed Hubs User’s GuidePart No -001.A01 Table Of Contents Power Switch AC Power Connector Kingston Technology Company KND2410TX User’s Guide Rev. A01 Model Types IntroductionPackage Contents Special FeaturesDesign Features Front Panel Hardware InstallationUplink Port 10/100TX UTP PortsAC Power Connector Power SwitchRear Panel FuseStack-In / Stack-Out Ports Stacking ConfigurationPort no or Speed-Setting Dip SwitchesAppendices UTP Port Pin Assignments Appendix a Pin AssignmentsUTP Cable Wiring Standards UTP Cable WiringAppendix B Cabling Guidelines UTP Cable TypeT568A Pairs Strand Solid UTP Cable Rating CodesTerms You Should Be Familiar With Appendix C SpecificationsAppendix C Specifications Class I vs. Class II 100BASE-TX Fast Ethernet Repeaters Appendix D Commonly Asked QuestionsCategory 5 Compliance vs. Category 5 Performance? Appendix E Warranties and NoticesDuration of Warranty Limited Warranty StatementWarranty Claim Requirements Free Technical SupportDisclaimers C. Certification CE NoticeTick Certification

KND2410TX, KND1610TX, KND810TX specifications

Kingston Technology's KND810TX, KND1610TX, and KND2410TX represent a significant leap in the memory module landscape, delivering high performance and reliability tailored for both consumer and enterprise applications. These models are part of Kingston's expansive range of DRAM solutions, ensuring that users get optimal speed and performance whether for gaming, content creation, or data-intensive enterprise tasks.

Starting with the KND810TX, this model highlights an impressive balance of performance and power efficiency. Designed for high-speed computing, it operates at DDR4 speeds, which allows for faster data transfer rates compared to its predecessors. Its low latency characteristic ensures that applications run smoothly and efficiently, making it ideal for gamers who require quick data access to enhance their gameplay experience. Furthermore, the KND810TX supports Intel's XMP (Extreme Memory Profile) technology, which allows users to optimize the memory settings through BIOS for maximum performance.

Next in line is the KND1610TX, a memory module that shines brightly in multi-tasking environments. This variant offers increased capacity options, accommodating more applications running simultaneously without compromising speed. Its robust design features advanced thermal management that allows it to operate under heavy workloads without overheating. The KND1610TX is particularly favorable for creators working with high-resolution video editing and graphic design, where memory demands can soar.

Lastly, the KND2410TX stands out with its high-capacity offerings, making it suitable for server environments and data centers. Built for mission-critical applications, this module demonstrates exceptional reliability and durability. The KND2410TX utilizes error-correcting code (ECC) technology, which automatically detects and corrects memory errors, ensuring data integrity during intensive tasks. This feature is particularly important for enterprise users who depend on absolute precision and reliability in their memory systems.

All three models—KND810TX, KND1610TX, and KND2410TX—incorporate cutting-edge technologies ensuring compatibility with various platforms while adhering to rigorous industry standards. Kingston's commitment to quality is evident through extensive testing and certifications, allowing customers to depend on these memory solutions for both personal and professional use. In sum, these memory modules from Kingston Technology provide a perfect blend of speed, reliability, and capacity, catering to the diverse needs of today's tech-driven users. Whether for casual use or professional environments, Kingston continues to set the benchmark for high-performance memory solutions.
Top Page Image Contents