Juniper Networks 200 manual Asset Recovery Pinhole, Red

Chapter 1 Overview

Alarm	System Alarm	red	Critical alarm:
			• Failure of hardware component or software
				module (such as a cryptographic algorithm).
			•	Firewall attacks detected.
			•	HA status changed
		amber	Major alarm:
			•	Low memory (less than 10% remaining).
			•	High CPU utilization (more than 90% in use).
			•	Session full.
			•	Maximum number of VPN tunnels reached.
			•	HA redundant group member not found.
		off	No alarms.
Status	Session	amber	Session utilization is between 70% and 90%.
	Utilization
		red	Session utilization is greater than 90%.
		off	Normal operation.
Flash	Memory Card	green	The card is installed.
	Status
		blinking green	Read-write activity is detected.
		off	Flash card slot is empty.

Asset Recovery Pinhole

The Asset Recovery Pinhole is a button that resets the device to its original default settings. To use this button, insert a stiff wire (such as a straightened paper clip) into the pinhole.

Warning: Because resetting the device restores it to the original default configuration, any new configuration settings are lost, and the firewall and all VPN service become inoperative.

4 User’s Guide