Uniden UA466ZL Weather Channels, MEM Entering channel numbers into Memory Scan, Volume Adjusting

Page 13

WHAM_UA466ZL UA01466ZA_0 9/20/02 12:50 PM Page 11

Weather Channels

To select Weather Channels 0-9, press WX/ALERT. The radio will go to the last selected Weather Channel. Press or to select a different Weather Channel.

To exit from Weather Channel:

Press WX/ALERT. The radio returns

to the previous Marine channel.

WX

8

 

 

MEM (Entering channel numbers into Memory Scan)

You can enter channels into Memory Scan for instant scanning at any time. When a channel is selected for Memory Scan, MEM appears on the LCD display.

To enter a channel into Memory Scan,

 

 

select the channel you want to store by

 

HI CAN

pressing /on the WHAM, and then

MEM

88

press and hold SCAN/MEM for 2 seconds.

 

The channel is stored in Memory Scan and

 

 

MEM appears on the LCD display.

 

 

Volume Adjusting

1.When you press POWER/VOL, the volume indicator appears on the display.

2.Press to turn the volume up, press to turn the volume down.

TRI LO CAN

88

VOL ¡¡¡

3.When you finish adjusting the volume, press the POWER/VOL to exit from the volume-adjusting mode.

11

Image 13
Contents WHAMUA466ZL UA01466ZA0 9/20/02 1250 PM Page a Contents Precautions Introduction FeaturesWham Included with your WhamMicrophone Controls and IndicatorsMenu Display Mounting the Drop-in Charger Getting StartedInstalling the Battery Pack InstallationInstalling the Beltclip Control Unit Connection and Installation Operation Power On/OffTriple Watch Weather Channels Volume AdjustingMEM Entering channel numbers into Memory Scan Appears Registering the Wham to the PolarisLow Battery Alert Hail Volume adjustBacklight Adjust HailDistress To cancel the Distress call, press H/L/SELECTCare and Maintenance TroubleshootingGeneral SpecificationWarranty WHAMUA466ZL UA01466ZA0 9/20/02 1250 PM Page b