WHAM_UA466ZL UA01466ZA_0 9/20/02 12:50 PM Page 8
Or
1.Put the alkaline battery tray inside, and install the 3 AAA batteries in the tray.
2.Replace the cover.
3.Lock both sides of the battery compartment.
4.Tighten the screw on the cover.
Installing the Beltclip
1.Place the beltclip on the mounting area on the back of the WHAM, making sure the hole in the clip lines up with the notch on the back of the WHAM.
2.Insert the screw into the corresponding hole and tighten.
8