GarrettCom Magnum 20X manual RPM-FSC Fiber SC, Snap-in Connector, Magnum RPM-FSC

10BASE-FL, FOIRL

SC Connectors

When distances of less than 2 km are needed, the jumper should be placed across pins 1 and 2.

J1

*When fiber cable distances of more than 2 km are selected, the minimum cable length must also be increased, as shown in the table above.

2.3.5RPM-FSC (Fiber SC, Snap-in Connector)

The Magnum RPM -FSC is also a multi-mode fiber optic repeater module, similar

to the RPM -FST. It has the same LEDs indicating port partitioned (PART), receive activity (RX), and link operational (LINK). It has the same jumper settings for

extra distance in certain circumstances.

1

While the functionality of the these two

2

modules is the same, the RPM -FSC is equipped with an

3

SC-type "snap -in" connector instead of an ST-type

"twist-lock" connector.		Magnum RPM-FSC
2.3.6	RPM-SMF (Single-mode Fiber)
	The Magnum RPM -SMF is a single-mode fiber optic module equipped with a
dual ST-type connector. It functions as a
full repeater to support single-mode fiber		Single-mode
		ST Connectors
networks. The RPM -SMF supports fiber
optic transmission distances of up to 10
Km. The RPM -SMF includes full		1
transceiver functionality and does not		2
require an external transceiver device.		3