GarrettCom Magnum 20X manual Contacting Garrett Communications

Page 4

Magnum 200X Two-Port Repeaters

Installation and User Guide (04/99)

Contacting Garrett Communications

Please use the mailing address, phone and fax numbers, and Internet address listed below.

Garrett Communications

213 Hammond Avenue

Fremont, CA 94539

Phone (510) 438-9071

Fax (510) 438-9072

WWW: http://www.garrettcom.com

email: support@garrettcom.com

Federal Communications Commission

Radio Frequency Interference Statement

This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be required to correct the interference

GARRETT

Image 4

Contents Magnum Two-Port Repeaters Page Magnum Two-Port Repeaters Installation and User Guide TrademarksContacting Garrett Communications Table of Contents Magnum Line Workgroup Bridges, 10Mb series Fan-Outs, 10Mb series Page Network Standards ConnectorsMaximum Ethernet Segment Lengths LED Indicators on Chassis Magnum 200X Power Supply InternalPackaging 200X Specifications Repeater Port Modules RPMs WarrantyOrdering Information Introduction Magnum 200X Spare PartsInspecting the Package and Product Product Description 1 Magnum Magnum 200X Repeater Port Modules RPMsMagnum RPM Cards RPM-BNC, RPM-AUI, RPM-DTE RPM-FST, RPM-FSC, RPM-TPMagnum RPM-BNC RPM-TP Twisted PairMagnum RPM-TP Page Shell Magnum RPM-FSTMagnum RPM-FSC RPM-FSC Fiber SC, Snap-in ConnectorRPM-SMF Single-mode Fiber Jumper Across Distances Supported 10 kmNot used RPM-DTESix Models for Mixed Media 10BASE2 BNC SegmentPage Locating the Magnum 200X Two-Port Repeater Connecting Ethernet MediaMagnum 200X Table-Top / Shelf Mounting Connecting Twisted Pair RJ-45, Unshielded or Shielded Connecting ThinNet 10BASE2 BNCConnecting ThickNet 10BASE5 AUI Connecting Drop Cable 10BASE5 DTEConnecting Fiber Optic SC-type, Snap-on Connecting Single-Mode Fiber Optic SMFStop Side view of RPM card Repeater Functionality Chassis LEDs Magnum 200X chassis unitBefore Calling for Assistance Return Material Authorization RMA Procedure Page B1.0 Specifications for Magnum 210X TWO-PORT Repeaters Power Supply Internal 48 VDC OptionB2.0 48V DC Power OPTION, Theory of Operation B3.0 ApplicationsB5.0 Operation B4.1 UL RequirementsB6.0 Ordering Information