GarrettCom DS80C, DS80F manual Applications, 100Mbps fiber

Page 15

Magnum DS80F & DS80C Dual-speed Stackable Hubs

Installation and User Guide (12/01)

2.6Applications

The DS80F & DS80C are designed to bring future-proof fiber connectivity and highly used copper connectivity to small user groups in offices, classrooms and labs.

Example 1. Magnum DS80F In this example, a Magnum DS80F Personal Hub serves a small office with multi-server and mixed-speed requirements. Some users operate at 100Mbps, and some users and utility devices (such as print servers) run at 10Mbps. High performance users need a high bandwidth backbone for access to a central LAN and central file servers. A Magnum DS80F Personal Hub serves this requirement economically. The two 1SW and 2SW full-duplex switched ports capability makes the required setup simple. Any attached node can change speed at any time without affecting network operation or impacting other users.

12V, 1.5Amps

Magnum DS80 Dual Speed

Personal Hub

100Mbps fiber

100

Server

 

 

Power

Speed

 

 

 

 

 

 

 

 

Error

Link/Act

 

 

 

 

 

 

 

GARRETT

 

F/H

 

 

 

 

 

 

 

PORTS

1SW 2SW

3

4

5

6

7

8

Tx

Rx

UPLINK

1SW

3

4

5

6

7

8

 

 

UPLINK

 

 

 

 

 

 

 

=

X

F

H 2SW

Print Server

100

100

 

 

10

Users

 

100

 

100

10 Mbps Workgroups

Figure 2.6.1: A DS80F connects combinations of 10Mbps and100Mbps network devices and

provides a Fast Ethernet fiber backbone for access to the central LAN.

Where there is existing 10Mbps hubs and users, they can easily be cascaded into any port of the DS80F. This allows a simple plug-and-play addition of 100Mbps ports to an existing 10Mbps network without having to change it. Nodes that are capable of 100Mbps speed can be moved to a DS80F dual-speed port, and will automatically operate at the higher speed.

The 1SW full duplex 100Mbps switched port can support a local server for Fast Ethernet users. The 100Mb fiber port on the DS80F can be used for accommodating high performance data transfers, and provides fiber connectivity built-in rather than needing an auxiliary media converter unit. The 100Mbps traffic does not use the bandwidth of the 10Mbps domain, so overall performance of the network is sustained at the highest possible level.

www . GarrettCom . com

10

Image 15
Contents Magnum DS80F & DS80C Personal Hubs Trademarks Email support@garrettcom.com Contacting GarrettCom, IncMagnum Line Specifications Network Standards Technical Specifications Performance of Dual-Speed PortsPower Supply External External -48VDC Power Supply OptionalUp-Link, Port # 1 SW Manual Switch DS80C FF or a switchDS80F F or H switch LED IndicatorsOrdering Information Inspecting the Package and Product Introduction10Mbps Hub 100Mbps Hub Product Description GeneralMagnum DS80C chassis with all RJ-45 Copper ports Fiber ST above, fiber SC at right3 10 / 100 Speed Auto-sensing Up-link Port 1SW for CascadingFiber port for DS80F Series Www . GarrettCom . com Small enclosure enables use in offices, labs and classrooms Internal switches connects all of the ports and users100Mbps fiber ApplicationsMagnum DS80C Dual Speed Personal Hub Example 2. Magnum DS80CLocating Magnum DS80F & DS80C Dual-Speed Hubs Table-Top or Shelf MountingWall or vertical surface mounting Media Ieee Standard Connecting Ethernet MediaPower Budget Calculations for DS80F Fiber Media Connecting Fiber Optic ST-type, twist-lockConnecting Fiber Optic SC-type, Snap-In Connecting Single-Mode Fiber OpticTypical Powering the Magnum DS80F and DS80CWww . GarrettCom . com Dual-speed functionality, and switching Switching, Filtering and ForwardingSwitching, Address Learning Auto-negotiation and speed-sensing LED’s Up-link PortUse with Media Converters Before Calling for Assistance TroubleshootingReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem Found