GarrettCom DS80F Technical Specifications Performance of Dual-Speed Ports, Network Standards

Page 6

Magnum DS80F & DS80C Dual-speed Stackable Hubs

Installation and User Guide (12/01)

1.0SPECIFICATIONS

1.1Technical Specifications

Performance of Dual-Speed Ports

When a port is operating at 100Mbps: Data Rate: 100Mbps

When a port is operating at 10Mbps: Data Rate: 10Mbps

Partitioning: Enforced after 63 consecutive collisions

Auto-reconnect: Occurs after one packet of error-free reception

Network Standards

100Mb: Ethernet IEEE 802.3u, 100BASE-TX, 100BASE-FX

10Mb: Ethernet IEEE 802.3, 10BASE-T

Auto-sensing for speed: IEEE 802.3u

Packet-Processing Between Domains

Filtering and Forwarding Rate from 100Mbps ports: 148,800 pps max

Filtering and Forwarding Rate from 10Mbps ports: 14,880 pps max.

Processing type: Store and Forward

Auto-learning: 8K address table, shared for all traffic domains

Packet buffers: 512KB, dynamically shared on all domains

Latency (not including packet time): 100 to 10Mbps: 5∝ s 10 to 100Mbps: 5∝ s

Path Delay Value: 50 BT on all ports

Maximum Ethernet Segment (or Domain) Lengths

10BASE-T (Unshielded twisted pair)

- 100 m (328 ft)

100BASE-TX (CAT 5 UTP)

 

- 100 m (328 ft)

100BASE-FX, half-duplex: (multi-mode)

-

412 m (1350 ft)

100BASE-FX, full-duplex: (multi-mode)

-

2.0 km (6,562 ft)

100BASE-FX, half-duplex: (single-mode)

-

412 m (1350 ft)

100BASE-FX, full-duplex: (single-mode)

- 20.0 km (65,620 ft)

100BASE-FX, full-duplex: (single-mode, long)

- 40.0 km (131,240 ft)

Operating Environment

 

 

 

Ambient Temperature:

32ºF to 104ºF (0ºC to 40ºC)

Storage Temperature:

-5ºC to 160ºF (-20ºC to 70ºC)

Ambient Relative Humidity: 10% to 95% (non-condensing)

Power Supply (External)

 

 

 

Input:

95-125 vac at 60Hz for “-d” Models

 

200-250 vac at 50Hz for “-i” Models, which have IEC

 

power cable connector in the external power unit.

Output:

5VDC, 2Amps

 

 

Polarity:

center positive, shell negative

Power Consumption: 8 watts typical, 10 watts max.

External -48VDC Power Supply (Optional)

www . GarrettCom . com

1

Image 6
Contents Magnum DS80F & DS80C Personal Hubs Trademarks Contacting GarrettCom, Inc Email support@garrettcom.comMagnum Line Specifications External -48VDC Power Supply Optional Technical Specifications Performance of Dual-Speed PortsPower Supply External Network StandardsLED Indicators Manual Switch DS80C FF or a switchDS80F F or H switch Up-Link, Port # 1 SWOrdering Information Introduction Inspecting the Package and ProductProduct Description General 10Mbps Hub 100Mbps HubFiber ST above, fiber SC at right Magnum DS80C chassis with all RJ-45 Copper ports3 10 / 100 Speed Auto-sensing Up-link Port 1SW for CascadingFiber port for DS80F Series Www . GarrettCom . com Internal switches connects all of the ports and users Small enclosure enables use in offices, labs and classroomsApplications 100Mbps fiberExample 2. Magnum DS80C Magnum DS80C Dual Speed Personal HubLocating Magnum DS80F & DS80C Dual-Speed Hubs Table-Top or Shelf MountingWall or vertical surface mounting Connecting Ethernet Media Media Ieee StandardConnecting Single-Mode Fiber Optic Connecting Fiber Optic ST-type, twist-lockConnecting Fiber Optic SC-type, Snap-In Power Budget Calculations for DS80F Fiber MediaPowering the Magnum DS80F and DS80C TypicalWww . GarrettCom . com Dual-speed functionality, and switching Switching, Filtering and ForwardingSwitching, Address Learning Auto-negotiation and speed-sensing LED’s Up-link PortUse with Media Converters Troubleshooting Before Calling for AssistanceWhen Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Shipping and Packaging Information