GarrettCom 500-Series manual Pwr, Lk/Rx, Fdx, Auto

Page 26

Magnum 500-Series Switching Hubs

Installation and User Guide (08/98)

 

 

4.2Status LEDs

For all Magnum 500-series models :

PWR

: Power LED, ON when AC power is applied to the unit.

LK/RX

: Link/Receive LED per 10Mb port, Steady ON for Link, Flashing

 

when the port has Receive activity.

FDX

: Full / Half Duplex LED per 10Mb port, ON when the port has

 

auto-negotiated to operate Full Duplex, OFF for half duplex.

For Magnum 528 and 528F models only :

AUTO

: Auto-negotiation LED, ON when copper “100Mb” ports are

 

configured to operate in the auto-negotiation mode, OFF when

 

their speed is internally fixed at 100Mb (no auto-negotiation, no

 

10Mb speed).

10 LED

: One for each “100Mb” port, ON when the copper port speed is

 

10Mb/s.

100 LED

: One for each “100Mb” port, ON when the port speed is 100Mb/s.

F/H

: Full / Half duplex LED, one for each 100Mb port, ON when the

 

port is running full duplex, OFF for half duplex.

4.3 Manual switches for 10Mb Up-link, and Fast Ethernet Full / Half Duplex

FDX

UPLINK

7

Up-link Switch

LK RX

 

100 Mb

 

AUTO

PWR

TX

 

RX

100

 

 

 

 

10

 

 

 

LK

F/H

 

 

 

RX

 

 

 

F/H

 

 

 

 

F

H

F

H

ST Connector(Magnum 528F only)

PWR

AUTO

LK/RX

FDX

100

100

10

10

F/H

1

2

F/H

 

 

F/H Switch(Magnum 528only)

Figure 4.3 : Up-link and F/H manual switches on front panel

The unit has a manual Up-link switch, located on the front panel next to 10Mb Port # 8 which it controls. It enables the port’s cable to either connect to a user station node (= position) or to be cascaded (X position) to a another 10Mb repeater or switching hub in the network. Verify proper Up-link switch position by noting Port 8’s LK/RX LED status, which is illuminated when a proper link is made. (Note: for optional up-link setting on 100Mb copper port #1 via an internal switch, see Section 3.4)

The two F/H switches are located next to each Fast Ethernet port on Magnum 528’s. When the two Fast Ethernet ports of a Model 528 are set to operate at fixed 100Mb speed (no auto-negotiation), manual selection of half or full duplex at 100Mb

GARRETT

21

Image 26
Contents Switching Hubs Trademarks Contacting Garrett Communications Fax 510 Email support@garrettcom.comInstallation Table of ContentsMagnum Specifications 100Mb/s Multi-mode Port Optical Typical Worst Power Supply InternalWarranty LEDsMagnum 528F-SC Ordering InformationMagnum Magnum 528F-STInspecting the Package and Product Product Description Magnum 500-Series Switching HubsIntroduction 2a Front view Magnum 508, 528 and 528F Switching Hubs Magnum 500-Series chassisUplink @ 100Mb Fiber port, type ST or SC Magnum 528F models only Frame Buffering and LatencyGarrett Assured 100Mb performance in any network set-up Full-duplex or Half-duplex operation, auto-sensingHigh Performance Dynamic Buffer Space AllocationApplications Example 1 MagnumExample 2 Magnum Example 3 Magnum InternetExample 4 Magnum 528F InternetInstallation Locating Magnum 500-Series switchesWall or Vertical Surface Mounting Magnum 500-Series, metal mounting brackets Optional E-StandMagnum 500-Series AC power connector 100BASE-TX connections Magnum 528 only Connecting Ethernet MediaMedia Ieee Standard Connecting Fiber Optic 100BASE-FX, Type ST and SC 100BASE-TX connections Magnum 528F onlyMagnum 528’s internal jumpers for auto-negotiation on or OFF OperationAddress Learning Switching FunctionalityFiltering and Forwarding FDX PWRLK/RX AutoAuto-negotiation option for Fast Ethernet copper ports Auto-negotiation for 10Mb ports, half- or full-duplex mode Collision-based Flow-control Troubleshooting Before Calling for AssistanceNo Problem Found When Calling for AssistanceReturn Material Authorization RMA Procedure Shipping and Packaging Information B3.0 Applications Appendix B 48VDC AddendumB2.0 Magnum 508, 528 and 528F 48VDC Option B5.0 Operation B4.0 InstallationB6.0 Troubleshooting