GarrettCom 500-Series manual Ordering Information, Magnum 528F-SC, Magnum 528F-ST

Magnum 500-Series Switching Hubs Installation and User Guide (08/98)

1.2Ordering Information

Magnum 500-Series Switching Hubs

MODEL	DESCRIPTION
Magnum 528	Switching Hub, eight ports at 10Mb F/H plus two 100Mb
	Fast Ethernet ports (F/H and 10/100). Self-learning 2K
	node-capacity address table, Store and Forward operation
	to filter all errored frames, full wire-speed filtering and
	forwarding among all ports. Up-link switch on 10Mb port
	# 8. Internal auto-ranging power supply.
	(The copper Fast Ethernet ports can be manually set to
	the desired mode, or may optionally be set for support of
	10/100 and F/H IEEE 802.3u standard auto-negotiation).
Magnum 528F-SC	Same as Model 528, but with a 100BASE-FX fiber port,
	multi-mode SC connector, and a 100Mb RJ-45 port.
Magnum 528F-ST	Same as Model 528, but with a 100BASE-FX fiber port,
	multi-mode ST connector, and a 100Mb RJ-45 port.

Magnum 528F-SMSCSame as Model 528, but with a 100BASE-FX fiber port, single-mode SC connector, and a 100Mb RJ-45 port.

Magnum 528F-SMSTSame as Model 528, but with a 100BASE-FX fiber port, single-mode ST connector, and a 100Mb RJ-45 port.

Magnum 508	Same as Model 528 but without the 2 Fast Ethernet ports
.	Eight 10Mb switched ports (no 100Mb ports)

Garrett Communications reserves the right to change specifications, performance characteristics and/or model offerings without notice.

GARRETT

3