GarrettCom 84-00136 manual Eight-Port Copper Module, 6K8-RJ45

Page 22

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)

HDX type of Fast Ethernet devices).

There are three LED’s per fiber port. The Link (LK) LED indicates “ready for operation” on that port when lit, the F/H LED indicates operation in full-duplex mode when ON (half-duplex when OFF), and the blinking ACT LED indicates receiving Activity on the port. A fiber cable must be connected into a SFF port and the Link (LK) indicator for that port must be ON (indicating there is a powered-up device at the other end of the cable) in order for a LK LED to provide valid indications of operating conditions on that port.

2.2.3Eight-Port Copper Module, 6K8-RJ45

The 6K8-Series’s 8-port Copper port module, model 6K8-RJ45, provides eight 10/100Mb switched RJ-45 ports. The 10/100Mb switched ports normally (as a default setting) are independently N-way auto-negotiating, and auto-crossover(MDIX) for operation at 10 or 100Mb speed in full- or half-duplex mode, i.e., each independently selects a mode and speed to match the device at the other end of the twisted pair cable.

(See Section 4.3 for auto-negotiation and MDIX details). The auto-crossover feature will automatically determine the other side of connection to make the connection, and eliminate the need of cross-over cable.

On the model 6K8-RJ45 module, there are four LEDs for each port, two in the

connector and two separate. The LK (Link) LED indicates “ready for operation” on that

port when lit. The blinking ACT (Activity) LED indicates receiving Activity on that port

when lit. The 10/100 LED indicates operation at 100Mb speed when ON and at 10 Mb

speed when OFF (when auto-

 

1

3

5

7

 

negotiation is not disabled).

 

 

10/100

 

 

 

 

LK

 

 

 

 

 

The FDX/HDX LED is ON

 

 

 

 

 

ACT

to indicate full-duplex

F/ H

2

4

6

8

 

operation and OFF to indicate

10/100

 

 

 

 

LK

 

 

 

 

 

half-duplex mode. A twisted

F/H

 

 

 

 

ACT

 

 

 

 

 

pair cable must be connected

into an RJ-45 port and the Link (LK) indicator for that port must be ON (indicating there is a powered-up device at the other end of the cable) in order for a LK LED to provide valid indications of operating conditions on that port.

Using the 6K16-Series (MNS-6K) management software, the user may disable auto-negotiation and fix the desired operation of each RJ-45 port. User may select 10Mb

www . GarrettCom . com

14

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Managed Fiber Switch Trademarks Contacting GarrettCom, Inc Canadian EmissionInstallation Table of ContentsIntroduction Intro Magnum 6K16/6K16V Managed Fiber Switch Port Modules45 OperationWww . GarrettCom . com Overview Bridge Port Modules BPMS, 4 TYPES, for Segment Media CONVERTERS, 10MB and 100MB SeriesTRANSCEIVERS, 10MB Series MINI-TRANSCEIVERS and Coax Models Network Standards and Compliance, hardware Technical SpecificationsPerformance Maximum 10 Mbps Ethernet Segment LengthsManagement Console connector Fiber Single-mode connector typesAlarm Relay Contacts Power Supply InternalAgency Approvals and Standard Compliance Magnum 6K16V Per-port MDI or Mdix on RJ-45Mountings Magnum 6K16Ordering Information 6KP8-SLC 6KP8-MTRJ6KP8-MLC 6KP4-FXSCWww . GarrettCom . com 6K PoE Modules with 48VDC Pass-Through Introduction Inspecting the Package and Product Product Description Magnum 6K16-Series 6K16/6K16V 1a Magnum 6K16V, Managed Fiber Switch 1b Magnum 6K16, Managed Carrier Class Switch 1c Magnum 6K16-Series family 6K16 and 6K16V, At a glance Set-up of the software See Magnum 6K-MNS Software Manual for Flexibility to adapt to any FDX orEight-Port Copper Module, 6K8-RJ45 Per the IEEE802.3af PoE Port modules are also available with Four-Port 10 Mb and 100Mb mm Fiber ST ModulesMagnum Combo six @ Mtrj 100Mb mm SFF fiberGigabit 1000Mbps port modules Packet Prioritization, 802.1p QOSFrame Buffering and Flow Control Managed Network Software MNS-6K for Magnum 6K8-Series GarrettCom proprietary MIBs for Snmp„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Applications Magnum 6K25 Snmp Backup Locating Magnum 6K16-Series Switches Connecting Ethernet MediaConnecting Single-Mode Fiber Optic Connecting Fiber Optic ST-type, twist-lockConnecting Fiber Optic SC-type, Snap-In Ieee Standard Media Type Max. Distance Port Module FiberMedia Ieee Standard Connecting Gigabit Media Using GBICs DIN-Rail Mounting Magnum 6K16VWww . GarrettCom . com Mounting Dimensions for 6K16Vwith metal brackets 2a- One Magnum 6K16 deployed over a K16-2Tray Powering the Magnum 6K16-Series Managed Fiber Switch Relay Contacts6K16-Series Port Module 6KPM Installation Preparation for Installing and Removing 6KPMsRemove Chassis Cover 1a Removing the Front panel from the unitInstalling 6KPM Cards in the Magnum 6K16-Series Remove front panel face plate retaining screwsUplink Switch 2f Securely latching up 6KPM Cards into a Magnum 6K16-Series Removing 6KPM Cards 3b Removing a 6KPM Card1 RS-232 DB-9 Console Com port Serial port pin assignments DB-9 Console port connectorEnlarged view of Magnum 6K16-Series Console Port area Filtering and Forwarding Switching FunctionalityAddress Learning Auto-CrossMDIX and Auto-negotiation, for RJ-45 ports Up-link Manual Switches set as = , for RJ-45 port onlyStatus LEDs PWRWww . GarrettCom . com Flow-control, Ieee 802.3x standard 6KP4V ’cvr6KPM Module Description Dual speed copper ports. Segments. When installed in aSwitch, the copper port Magnum 6K16-Series Managed1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Transceivers all in one module. This Mode 100Mbps fiber opticMagnum 6KP6 Activity ACT, Link LK,Www . GarrettCom . com Activity FULL/HALF Port@ 100Mbps Multi-Mode Fiber portLink Module is a combo module with Mtrj type ports. The small size Mtrj connectors provides anMagnum 6KP8-45MT Copper and fiber Small Form Factor9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Fig. the top 8-RJ45 PoE LEDs SummaryMagnum 6KP8 GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector 13a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector14 6KM-BLNK @ 1000Mb Fiber SC + 2@ 100Mb SCBefore Calling for Assistance When Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Appendix B Internal DC Power Supply OptionsShipping and Packaging Information B2.0 -48VDC, 24VDC and 125VDC POWER, Theory of Operation B3.0 Applications for DC Powered Ethernet Switches B4.0 6K16-SERIES, -48V, 24, 125 or 5VDC InstallationB5.0 Operation B7.0 TroubleshootingC1.0 Specifications for Magnum 6K16-SERIES Fiber Switch B6.0 Ordering InformationC4.0 Features and Benefits of the DUAL-SOURCE Design GNDC5.0 Installation Example Magnum 6K16-SeriesR-48VDC C5.1 UL RequirementsC6.0 Ordering Information C7.0 Operation

84-00136 specifications

GarrettCom 84-00136 is a robust and reliable networking solution widely recognized for its versatility and performance in demanding environments. Specifically designed for industrial applications, the device excels in offering connectivity within harsh conditions, ensuring seamless communication across various network topologies.

One of the standout features of the GarrettCom 84-00136 is its high port density. With multiple Ethernet ports, it allows for extensive network connections, making it an ideal choice for facilities that require numerous devices to be interlinked. This capability ensures that organizations can efficiently manage their communication needs without compromising on performance.

Another significant characteristic of the 84-00136 is its industrial-grade durability. Built to withstand extreme temperatures, vibrations, and shocks, the device is suited for applications in manufacturing plants, transportation systems, and utility networks. This level of resilience is essential for maintaining reliable operations in environments where standard networking equipment might fail.

The technology behind the GarrettCom 84-00136 includes advanced switching capabilities. With support for both managed and unmanaged configurations, users can choose the level of control and customization that best fits their network requirements. The managed features allow for extensive monitoring and management, facilitating better network performance and security.

In addition, the 84-00136 supports various communication protocols, improving interoperability with existing systems. This flexibility is crucial for organizations looking to integrate new technologies into their established networks without overhauling the entire system.

Security is another critical aspect of the GarrettCom 84-00136. The device is equipped with robust security features, ensuring that network data remains protected from unauthorized access. This is particularly important in industrial environments where sensitive information must be safeguarded against potential cyber threats.

Ease of installation and maintenance is also a highlight of the GarrettCom 84-00136. Its user-friendly design allows for straightforward setup, minimizing downtime during deployment. Furthermore, ongoing maintenance is simplified through an intuitive interface, enabling quick troubleshooting and adjustments.

In summary, the GarrettCom 84-00136 is a high-performance networking solution tailored for industrial applications. Its impressive features, including high port density, industrial-grade durability, advanced switching capabilities, and robust security measures, make it an optimal choice for organizations seeking reliable and efficient network connectivity in challenging environments.
Top Page Image Contents