GarrettCom 84-00136 Status LEDs, Up-link Manual Switches set as = , for RJ-45 port only, Pwr, Act

Page 49

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)

4.2Status LEDs

For Magnum 6K16-Series models (6K16/6K16V) :

PWR

: Power LED, ON when external power is applied to the unit.

LK

: Steady ON, Link status for 10 Mbps and 100Mbps operation.

ACT

: ON with port activity for 10 Mbps and 100Mbps operation.

F/H

: Full / Half duplex LED, ON when the port is running full duplex,

 

OFF for half duplex.

100/10

: Speed LED, ON when the speed is 100Mbps , OFF when the

 

speed is 10 Mbps

4.3Up-link Manual Switches set as (=) , for RJ-45 port only

The module has a manual Up-link switch, located on the inside of the board

next to the 10/100Mb (6K8-RJ45) port # 1 which it controls. It enables the port’s cable to be cascaded (X) to a 10/100Mb repeater or switching hub in the network. The Up-link Switch position is configured as (=) straight position by default from the factory settings on all the RJ-45 ports, either used for all copper module or combo module.

4.4Auto-Cross(MDIX) and Auto-negotiation, for RJ-45 ports

The RJ-45 ports independently support auto-cross (MDI or MDIX) in auto-negotiation mode and will work properly with all the other connected devices with RJ-45 port whether it supports Auto-negotiation or not (e.g 10Mb Hub, media converter) or fixed mode at 10Mb or 100Mb Half/Full Duplex(managed switch). No cross-over cable is required while using the 6K8’s copper port to other devices. Operation is according to the IEEE 802.3u standard.

The Managed 6K16-Series Fast Ethernet copper ports, can be set for either fixed 100Mb speed or for 10/100 F/H N-way auto-negotiation per the IEEE802.3u standard. The selection is made via MNS software. The factory default setting is for auto-negotiation. At 10Mb or 100Mb-fixed speed, the user may select half- or full-duplex mode by MNS Software for each RJ-45 port separately. For detail information See Section (10.1 at

page no.52) of this manual to access the “6K-MNS(Rel 3) Software user guide”

One frequently-used application for the Managed Magnum 6K16-Series Switch copper ports is to connect one of them using a fiber media converter to another Switch in the network backbone, or to some other remote 100Mb device. In this case, it is desirable to operate the fiber link at 100Mb speed, and at either half- or full duplex mode depending on the capabilities of the remote device. Standard commercially available Fast Ethernet media converters mostly do not support auto-negotiation properly, and require that the switched port to which they are connected be at 100Mb fixed speed. Attachment to 10/100 auto-negotiation ports typically will not work properly. The

www . GarrettCom . com

41

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Managed Fiber Switch Trademarks Canadian Emission Contacting GarrettCom, IncInstallation Table of ContentsIntroduction Operation Intro Magnum 6K16/6K16V Managed Fiber Switch Port Modules45Www . GarrettCom . com Overview Bridge Port Modules BPMS, 4 TYPES, for Segment Media CONVERTERS, 10MB and 100MB SeriesTRANSCEIVERS, 10MB Series MINI-TRANSCEIVERS and Coax Models Performance Technical SpecificationsNetwork Standards and Compliance, hardware Maximum 10 Mbps Ethernet Segment LengthsAlarm Relay Contacts Fiber Single-mode connector typesManagement Console connector Power Supply InternalMountings Per-port MDI or Mdix on RJ-45Agency Approvals and Standard Compliance Magnum 6K16V Magnum 6K16Ordering Information 6KP8-MLC 6KP8-MTRJ6KP8-SLC 6KP4-FXSCWww . GarrettCom . com 6K PoE Modules with 48VDC Pass-Through Introduction Inspecting the Package and Product Product Description Magnum 6K16-Series 6K16/6K16V 1a Magnum 6K16V, Managed Fiber Switch 1b Magnum 6K16, Managed Carrier Class Switch 1c Magnum 6K16-Series family 6K16 and 6K16V, At a glance Flexibility to adapt to any FDX or Set-up of the software See Magnum 6K-MNS Software Manual forEight-Port Copper Module, 6K8-RJ45 Per the IEEE802.3af PoE Magnum Combo six Four-Port 10 Mb and 100Mb mm Fiber ST ModulesPort modules are also available with @ Mtrj 100Mb mm SFF fiberPacket Prioritization, 802.1p QOS Gigabit 1000Mbps port modulesFrame Buffering and Flow Control GarrettCom proprietary MIBs for Snmp Managed Network Software MNS-6K for Magnum 6K8-Series„ Managed switching for high performance Ethernet LANs Features and Benefits„ Features Fiber-Built-In Applications Magnum 6K25 Snmp Backup Connecting Ethernet Media Locating Magnum 6K16-Series SwitchesConnecting Fiber Optic SC-type, Snap-In Connecting Fiber Optic ST-type, twist-lockConnecting Single-Mode Fiber Optic Ieee Standard Media Type Max. Distance Port Module FiberMedia Ieee Standard DIN-Rail Mounting Magnum 6K16V Connecting Gigabit Media Using GBICsWww . GarrettCom . com Mounting Dimensions for 6K16Vwith metal brackets 2a- One Magnum 6K16 deployed over a K16-2Tray Relay Contacts Powering the Magnum 6K16-Series Managed Fiber SwitchPreparation for Installing and Removing 6KPMs 6K16-Series Port Module 6KPM Installation1a Removing the Front panel from the unit Remove Chassis CoverRemove front panel face plate retaining screws Installing 6KPM Cards in the Magnum 6K16-SeriesUplink Switch 2f Securely latching up 6KPM Cards into a Magnum 6K16-Series 3b Removing a 6KPM Card Removing 6KPM Cards1 RS-232 DB-9 Console Com port Serial port pin assignments DB-9 Console port connectorEnlarged view of Magnum 6K16-Series Console Port area Filtering and Forwarding Switching FunctionalityAddress Learning Status LEDs Up-link Manual Switches set as = , for RJ-45 port onlyAuto-CrossMDIX and Auto-negotiation, for RJ-45 ports PWRWww . GarrettCom . com Flow-control, Ieee 802.3x standard ’cvr 6KP4V6KPM Module Description Switch, the copper port Segments. When installed in aDual speed copper ports. Magnum 6K16-Series Managed1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Magnum 6KP6 Mode 100Mbps fiber opticTransceivers all in one module. This Activity ACT, Link LK,Www . GarrettCom . com Activity FULL/HALF Port@ 100Mbps Multi-Mode Fiber portLink Magnum 6KP8-45MT Mtrj type ports. The small size Mtrj connectors provides anModule is a combo module with Copper and fiber Small Form Factor9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port PoE LEDs Summary Fig. the top 8-RJ45Magnum 6KP8 13a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC + 2@ 100Mb SC 14 6KM-BLNKBefore Calling for Assistance Return Material Authorization RMA Procedure When Calling for AssistanceNo Problem Found Appendix B Internal DC Power Supply OptionsShipping and Packaging Information B2.0 -48VDC, 24VDC and 125VDC POWER, Theory of Operation B4.0 6K16-SERIES, -48V, 24, 125 or 5VDC Installation B3.0 Applications for DC Powered Ethernet SwitchesC1.0 Specifications for Magnum 6K16-SERIES Fiber Switch B7.0 TroubleshootingB5.0 Operation B6.0 Ordering InformationGND C4.0 Features and Benefits of the DUAL-SOURCE DesignC5.0 Installation C6.0 Ordering Information C5.1 UL RequirementsExample Magnum 6K16-SeriesR-48VDC C7.0 Operation

84-00136 specifications

GarrettCom 84-00136 is a robust and reliable networking solution widely recognized for its versatility and performance in demanding environments. Specifically designed for industrial applications, the device excels in offering connectivity within harsh conditions, ensuring seamless communication across various network topologies.

One of the standout features of the GarrettCom 84-00136 is its high port density. With multiple Ethernet ports, it allows for extensive network connections, making it an ideal choice for facilities that require numerous devices to be interlinked. This capability ensures that organizations can efficiently manage their communication needs without compromising on performance.

Another significant characteristic of the 84-00136 is its industrial-grade durability. Built to withstand extreme temperatures, vibrations, and shocks, the device is suited for applications in manufacturing plants, transportation systems, and utility networks. This level of resilience is essential for maintaining reliable operations in environments where standard networking equipment might fail.

The technology behind the GarrettCom 84-00136 includes advanced switching capabilities. With support for both managed and unmanaged configurations, users can choose the level of control and customization that best fits their network requirements. The managed features allow for extensive monitoring and management, facilitating better network performance and security.

In addition, the 84-00136 supports various communication protocols, improving interoperability with existing systems. This flexibility is crucial for organizations looking to integrate new technologies into their established networks without overhauling the entire system.

Security is another critical aspect of the GarrettCom 84-00136. The device is equipped with robust security features, ensuring that network data remains protected from unauthorized access. This is particularly important in industrial environments where sensitive information must be safeguarded against potential cyber threats.

Ease of installation and maintenance is also a highlight of the GarrettCom 84-00136. Its user-friendly design allows for straightforward setup, minimizing downtime during deployment. Furthermore, ongoing maintenance is simplified through an intuitive interface, enabling quick troubleshooting and adjustments.

In summary, the GarrettCom 84-00136 is a high-performance networking solution tailored for industrial applications. Its impressive features, including high port density, industrial-grade durability, advanced switching capabilities, and robust security measures, make it an optimal choice for organizations seeking reliable and efficient network connectivity in challenging environments.
Top Page Image Contents