GarrettCom 84-00136 manual Locating Magnum 6K16-Series Switches, Connecting Ethernet Media

Page 33

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)

3.0Installation

Before installing the equipment, it is necessary to take the following precautions:

1.) If the equipment is mounted in an enclosed or multiple rack assembly, the environmental temperature around the equipment must be less than or equal to 500C.

2.) If the equipment is mounted in an enclosed or multiple rack assembly, adequate air flow must be maintained for proper and safe operation.

3.) If the equipment is mounted in an enclosed or multiple rack system, placement of the equipment must not overload or load unevenly the rack system.

4.) If the equipment is mounted in an enclosed or multiple rack assembly, verify the equipment’s power requirements to prevent overloading of the building/s electrical circuits.

5.) If the equipment is mounted in an enclosed or multiple rack assembly verify that the equipment has a reliable and uncompromised earthing path.

This section describes installation of the Magnum 6K16-Series Switches, as well as connection of the various Ethernet media types.

3.1Locating Magnum 6K16-Series Switches

For vertical panel mounting and wall mounting, see Section 3.4. For vertical DIN-Rail mounting, see Section 3.3.

For DC power options, see Appendix B. For Dual Source, see Appendix C. For AC power input, locate an AC receptacle that is within six feet (2 meters)

of the intended Magnum 6K16-Series site. The rugged metal case of the Magnum 6K16- Series will normally protect it from accidental damage in a lab or workplace setting. Maintain an open view of the front to visually monitor the status LEDs. Keep an open area around the unit so that cooling can occur from convection while the unit is in operation. The 6K16-Series has no fans, so it is silent when in operation. Internal electronics use the case as a heat sink, so the unit may normally be quite warm to the touch.

3.2Connecting Ethernet Media

The Magnum 6K16-Series Switches are specifically designed to support all standard Ethernet media types within a single Switch unit. This is accomplished by using a family of different port Modules which can be individually selected and configured per-port. See Section 2.4 for a description of the PMs.

The various media types supported along with the corresponding IEEE 802.3, 802.3D, 802.3u, 802.3AB and 802.3z standards and connector types are as follows:

www . GarrettCom . com

25

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Managed Fiber Switch Trademarks Canadian Emission Contacting GarrettCom, IncTable of Contents InstallationIntroduction Operation Intro Magnum 6K16/6K16V Managed Fiber Switch Port Modules45Www . GarrettCom . com Overview Media CONVERTERS, 10MB and 100MB Series Bridge Port Modules BPMS, 4 TYPES, for SegmentTRANSCEIVERS, 10MB Series MINI-TRANSCEIVERS and Coax Models Performance Technical SpecificationsNetwork Standards and Compliance, hardware Maximum 10 Mbps Ethernet Segment LengthsAlarm Relay Contacts Fiber Single-mode connector typesManagement Console connector Power Supply InternalMountings Per-port MDI or Mdix on RJ-45Agency Approvals and Standard Compliance Magnum 6K16V Magnum 6K16Ordering Information 6KP8-MLC 6KP8-MTRJ6KP8-SLC 6KP4-FXSCWww . GarrettCom . com 6K PoE Modules with 48VDC Pass-Through Introduction Inspecting the Package and Product Product Description Magnum 6K16-Series 6K16/6K16V 1a Magnum 6K16V, Managed Fiber Switch 1b Magnum 6K16, Managed Carrier Class Switch 1c Magnum 6K16-Series family 6K16 and 6K16V, At a glance Flexibility to adapt to any FDX or Set-up of the software See Magnum 6K-MNS Software Manual forEight-Port Copper Module, 6K8-RJ45 Per the IEEE802.3af PoE Magnum Combo six Four-Port 10 Mb and 100Mb mm Fiber ST ModulesPort modules are also available with @ Mtrj 100Mb mm SFF fiberPacket Prioritization, 802.1p QOS Gigabit 1000Mbps port modulesFrame Buffering and Flow Control GarrettCom proprietary MIBs for Snmp Managed Network Software MNS-6K for Magnum 6K8-SeriesFeatures and Benefits „ Managed switching for high performance Ethernet LANs„ Features Fiber-Built-In Applications Magnum 6K25 Snmp Backup Connecting Ethernet Media Locating Magnum 6K16-Series SwitchesConnecting Fiber Optic SC-type, Snap-In Connecting Fiber Optic ST-type, twist-lockConnecting Single-Mode Fiber Optic Ieee Standard Media Type Max. Distance Port Module FiberMedia Ieee Standard DIN-Rail Mounting Magnum 6K16V Connecting Gigabit Media Using GBICsWww . GarrettCom . com Mounting Dimensions for 6K16Vwith metal brackets 2a- One Magnum 6K16 deployed over a K16-2Tray Relay Contacts Powering the Magnum 6K16-Series Managed Fiber SwitchPreparation for Installing and Removing 6KPMs 6K16-Series Port Module 6KPM Installation1a Removing the Front panel from the unit Remove Chassis CoverRemove front panel face plate retaining screws Installing 6KPM Cards in the Magnum 6K16-SeriesUplink Switch 2f Securely latching up 6KPM Cards into a Magnum 6K16-Series 3b Removing a 6KPM Card Removing 6KPM CardsDB-9 Console port connector 1 RS-232 DB-9 Console Com port Serial port pin assignmentsEnlarged view of Magnum 6K16-Series Console Port area Switching Functionality Filtering and ForwardingAddress Learning Status LEDs Up-link Manual Switches set as = , for RJ-45 port onlyAuto-CrossMDIX and Auto-negotiation, for RJ-45 ports PWRWww . GarrettCom . com Flow-control, Ieee 802.3x standard ’cvr 6KP4V6KPM Module Description Switch, the copper port Segments. When installed in aDual speed copper ports. Magnum 6K16-Series Managed1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Magnum 6KP6 Mode 100Mbps fiber opticTransceivers all in one module. This Activity ACT, Link LK,Www . GarrettCom . com Port@ 100Mbps Multi-Mode Fiber port Activity FULL/HALFLink Magnum 6KP8-45MT Mtrj type ports. The small size Mtrj connectors provides anModule is a combo module with Copper and fiber Small Form Factor9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port PoE LEDs Summary Fig. the top 8-RJ45Magnum 6KP8 13a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector@ 1000Mb Fiber SC + 2@ 100Mb SC 14 6KM-BLNKBefore Calling for Assistance Return Material Authorization RMA Procedure When Calling for AssistanceAppendix B Internal DC Power Supply Options No Problem FoundShipping and Packaging Information B2.0 -48VDC, 24VDC and 125VDC POWER, Theory of Operation B4.0 6K16-SERIES, -48V, 24, 125 or 5VDC Installation B3.0 Applications for DC Powered Ethernet SwitchesC1.0 Specifications for Magnum 6K16-SERIES Fiber Switch B7.0 TroubleshootingB5.0 Operation B6.0 Ordering InformationGND C4.0 Features and Benefits of the DUAL-SOURCE DesignC5.0 Installation C6.0 Ordering Information C5.1 UL RequirementsExample Magnum 6K16-SeriesR-48VDC C7.0 Operation

84-00136 specifications

GarrettCom 84-00136 is a robust and reliable networking solution widely recognized for its versatility and performance in demanding environments. Specifically designed for industrial applications, the device excels in offering connectivity within harsh conditions, ensuring seamless communication across various network topologies.

One of the standout features of the GarrettCom 84-00136 is its high port density. With multiple Ethernet ports, it allows for extensive network connections, making it an ideal choice for facilities that require numerous devices to be interlinked. This capability ensures that organizations can efficiently manage their communication needs without compromising on performance.

Another significant characteristic of the 84-00136 is its industrial-grade durability. Built to withstand extreme temperatures, vibrations, and shocks, the device is suited for applications in manufacturing plants, transportation systems, and utility networks. This level of resilience is essential for maintaining reliable operations in environments where standard networking equipment might fail.

The technology behind the GarrettCom 84-00136 includes advanced switching capabilities. With support for both managed and unmanaged configurations, users can choose the level of control and customization that best fits their network requirements. The managed features allow for extensive monitoring and management, facilitating better network performance and security.

In addition, the 84-00136 supports various communication protocols, improving interoperability with existing systems. This flexibility is crucial for organizations looking to integrate new technologies into their established networks without overhauling the entire system.

Security is another critical aspect of the GarrettCom 84-00136. The device is equipped with robust security features, ensuring that network data remains protected from unauthorized access. This is particularly important in industrial environments where sensitive information must be safeguarded against potential cyber threats.

Ease of installation and maintenance is also a highlight of the GarrettCom 84-00136. Its user-friendly design allows for straightforward setup, minimizing downtime during deployment. Furthermore, ongoing maintenance is simplified through an intuitive interface, enabling quick troubleshooting and adjustments.

In summary, the GarrettCom 84-00136 is a high-performance networking solution tailored for industrial applications. Its impressive features, including high port density, industrial-grade durability, advanced switching capabilities, and robust security measures, make it an optimal choice for organizations seeking reliable and efficient network connectivity in challenging environments.
Top Page Image Contents