GarrettCom 4K-Series manual Fiber Port Module FPM Installation

Magnum 4K8 Switches Installation and User Guide (10/04)

3.4Fiber Port Module (FPM) Installation

The Magnum 4K-Series Fiber Switches are normally received from the factory with all required FPM modules installed. There may be situations where FPM cards need to be added or replaced. In cases where additional FPM cards are needed, the face plate for an available front-mounted slot must be removed. The following procedure describes this operation.

3.4.1Preparation for Installing and Removing FPMs

STOP!!!

Be sure the power cord is unplugged

from the chassis before attempting to remove

and/or replace any FPM cards.

Failure to do so may result in damage to the unit

and will void the warranty.

ARRÊT!!!!

Soyez sûr que le code de puissance

est débranché du châssis avant d'essayer au retirer

et/ou substitue toutes les cartes de FPM. Le manque de faire ainsi le résultat dans les

dommages à l'unité et videra la garantie.

Caution- Avoid Static Discharge: The Fiber port modules (like most electronic equipment) are sensitive to static discharge. Use proper ESD measures when handling port modules.

L'Attention Évitent La Décharge Statique: Les modules de port de fibre (comme la plupart de matériel électronique) sont sensibles à la décharge statique. Utilisez les mesures appropriées d'cEsd en manipulant les modules gauches.

Step 1. Make sure the FPM Card package has all necessary accessories to install it properly. The FPM Card package for field installation comes along with a FPM Card, enclosed with the Fiber Port Module Insertion guide.

NOTE: Please read the Port Module Insertion guide and 4K8 Manual thoroughly before doing any field installation of FPM card.

www . GarrettCom . com

18