GarrettCom 4K-Series manual LEDs Per Port, Operating Environment, Packaging, Power Supply Internal

Page 8

Magnum 4K8 Switches Installation and User Guide (10/04)

LEDs: Per Port

LK/Act: Steady ON for Link with no traffic, blinking indicates port is transmitting and receiving

F/H: ON = Full-Duplex Mode OFF = Half-Duplex Mode

100/10: ON = 100Mbps speed OFF = 10 Mbps

Operating Environment

Ambient Temperature: 25° to 140° F (-5° to 60°C)

Storage Temperature: 0°to 185°F (-40°to 85°C)

Ambient Relative Humidity: 5% to 95% (non-condensing)

Altitude: -200 to 13,000ft (-60 to 4000m)

Conformal coating options: Request quote

Packaging

Enclosure: Rugged High strength metal. Suitable for stand- alone or rack-mounting

Dimensions: 1.75 in H x 17.0 in W x 9.0 in D 4.45cm H x 43.2cm W x 22.9cm D

Weight: 3.2 lb. (1.4 Kg) rack-mount models

Cooling method: Fan cooled, @ 9 cfm

Power Supply (Internal)

AC Power Connector: IEC-type, male recessed at rear of chassis, with adjacent manual ON-OFF switch (on AC models only)

Input Voltage: 110 to 240 VAC (auto-ranging)

Input Frequency: 47 to 63 Hz (auto-ranging)

Power Consumption: 9 watts typical, 11 watts max.

Power Supply Rating: 3Amps at 5VDC

DC Power Supply (Options)

-48VDC Power Input Voltage : 36 to 72 VDC

24VDC Power Input Voltage : 20 to 36VDC

125VDC Power Input Voltage : 120 to 160VDC

Std. Terminal Block : “ -, GND, + ”

Power Consumption: same as for AC models, see above

For Dual Source and Redundant DC for –48VDC, 24VDC & 125VDC supply options (Optional), see Appendices

Mechanical

Enclosure : Rugged high strength sheet metal. Suitable for stand-alone or 1U rack mounting.

Rack-mounting brackets: 19” included; ETSI and 23” Telco optional.

Agency Approvals

UL listed (UL1950), cUL, CE

Emissions meet FCC Part 15 Class B

Optional: ETSI and NEBS L3 Certified

Warranty

Three years, return to factory

Made in USA

www . GarrettCom . com

2

Image 8

Contents 4K8 Switches Magnum 4K-Series 4K8 Switches Installation and User Guide TrademarksContacting GarrettCom, Inc Email support@garrettcom.comTable of Contents IntroductionTroubleshooting Media Converters, 10Mb and 100Mb series Personal Switches , 10/100MbPersonal Hubs, 10Mb series Technical Specifications Power Supply Internal DC Power Supply OptionsWarranty LEDs Per PortOrdering Information Introduction Inspecting the Package and Product Product Description Magnum 4K8 Switches Magnum 4K8 Switch chassisRear View Front ViewFiber-port modules, 100Mb fiber 3 Fiber-Port Modules, FPM-ST, FPM-SC, FPM-MTRJ5 10/100 Dual-speed Switched ports, RJ-45 copper Fiber-port modules, 10 Mb fiberFrame Buffering and Latency Magnum 4K8 Switches Installation and User Guide 10/04 „ Full-duplex or Half-duplex operation, auto-sensing Features and Benefits„ Eight RJ-45 copper ports, 10/100 auto-negotiation Applications Router 4b Magnum 4K8 provides a 100Mb backbone Switch Magnum 4K-Series Ethernet 10/100 SwitchInstallation Locating Magnum 4K8 SwitchesConnecting Ethernet Media Connecting Fiber Optic ST-type, twist-lockIeee Standard Media Type Max. Distance Port Module Fiber CopperMedia Ieee Standard Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Are similar to the 19 brackets But use metric dimensions Rack-mountingEtsi European Telephone Standard brackets Optional Brackets and the Etsi bracketsFiber Port Module FPM Installation Preparation for Installing and Removing FPMsRemove Chassis Cover 1a Removing Chassis CoverInstalling FPM Cards in the Magnum 4K8 Switches Before insertionRemoving FPM Cards from Magnum 4K8 Switches 2b Inserting PM Cards into a Magnum 4K8Powering the Magnum 4K8 Switch 3b Removing a FPM CardAddress Learning Switching FunctionalityFiltering and Forwarding Manual Switches F-H, for FPM Port#9 only ErrorStatus LEDs Auto-negotiation, for Fast Ethernet copper portsMagnum 4K8 Switches Installation and User Guide 10/04 Auto-negotiation for 10/100Mb ports Flow-control, Ieee 802.3x standardFiber Port Module Product Description Introduction Magnum 4K8 Fiber-Port Modules FPMInspecting the Package and Product Optional FPM-MST, 100Mbps multi-mode FX-ST-type, twist-lock connector FPM-MSC 100Mbps multi-mode FX-SC-type, snap-in connectorFPM-SSC 100Mbps single-mode FX-SC-type, snap-in connector Activity 2 Link100BASE-FX MT-RJ Activity LinkFPM-Blank FPM-BlankBefore Calling for Assistance When Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Shipping and Packaging InformationPower Supply Internal 125 VDC Option Industrial Application B3.0 Applications for DC Powered SwitchesB4.0 Installation Figure B4.1 -48VDC Terminal Block on Magnum Ks-48VDCB7.0 Troubleshooting B4.1 UL RequirementsB5.0 Operation B6.0 Ordering InformationC3.0 DUAL-SOURCE OPTION, Theory of Operation C4.0 Features and Benefits of the DUAL-SOURCE DesignC5.0 Installation C5.1 UL Requirements C6.0 Ordering InformationExample Magnum 4K8-48VDC C7.0 Operation