GE Power Supply user manual Fccis Interference Statements, 1kVA Model

Page 6

g

Digital EnergyGT Series

1.6FCCIS Interference Statements

1kVA MODEL

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1.5 and 3kVA MODELS

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

FCC Caution: To assure continued compliance use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

OPM_GTU_19X_1K0_3K0_XUS_V014

5

GT-UL Series: User manual 1.2 (US)

Image 6
Contents Digital EnergyTMGT Series Digital Energy GT Series Important Safety Instructions Important Safety Instructions InstallationGeneral Batteries Transport/storageFccis Interference Statements 1kVA ModelLocation InstallationPackage contents Rear panelVertical installation Mounting in a 19 enclosureConnecting the RS232/dry contact interface Connecting an external battery packUL 1778 safety requirement Connecting the loadConnecting to the utility power supply 1000/1500VA Checking the site-wiring fault LED2200/3000VA Operation Operation PanelStart-up Use Normal OperationUse Abnormal Conditions Replace battery Bypass operationShort circuit Communication DescriptionRS232 Dry ContactSpecifications Snmp Plug-in Card optionalFunctions Optional Features MaintenanceRecycling the UPS at the end of service life Battery replacement procedure 1.5kVA 1 Remove front panelBattery replacement procedure 3kVA Troubleshooting Problem Possible Cause SolutionSpecifications GT Model 1000R UL 1500R UL 2200R UL 3000R UL