g
Digital Energy™ GT Series
2.4Installation
The unit should be installed by service personnel.
IMPORTANT:
Before making any connection and switching on the UPS, please check the following conditions:
•Mains supply is 100/110/120 Volts and 50/60Hz,
•Total power demand of the connected equipment does not exceed the rated output power of the UPS (indicated on the rating label).
2.4.1Mounting in a 19” enclosure
1. Install the mounting bracket. See fig. 2.2.
2. Adjust the rails and gently slide UPS into the rails. See fig. 2.3.
3. Fix mounting bracket on the enclosure by screws. See fig. 2.3.
1
3
2
Fig 2.2 Installing the mounting brackets | Fig 2.3 Mounting the UPS |
2.4.2Vertical installation
The UPS is rack mountable as well as standing alone. You can mount the UPS on the shelf, or you can erect the UPS with supporting stands (not included in delivery) as shown in fig 2.4.
Fig 2.4 Vertical installation
Supporting stands (not included)
OPM_GTU_19X_1K0_3K0_XUS_V014 | 7 |