GE GFK-0726B manual Series 90-30 State Logic Processor

Page 11

a45127

	BD
	OK
CURRENTLY
INSTALLED
BATTERY
CONNECTOR	RESTART
	RESTART
OPEN
REPLACEMENT
BATTERY
CONNECTOR	BATTERY
	BATTERY
	PORTS
	1 AND 2
SLP 300

Figure 1-2. Series 90-30 State Logic Processor

The SLP comes with a battery to maintain memory when power is removed. This is a lithium battery which is installed as shown in the SLP drawings. When the battery reaches a low charge, this condition is reported to the PLC fault table.

GFK-0726B

Chapter 1 State Logic Processor Description

1-3

Image 11

Contents GE Fanuc Automation GFL±002 GE Fanuc Automation North America, Inc Page We Welcome Your Comments and Suggestions Content of this ManualContents SampleLogicmasterConfigurationScreen Contents Chapter State Logic Processor Description GFK-0726B Physical DescriptionSeries 90-30 State Logic Processor Operational Description Inserting the SLP Chapter Installation and MaintenanceSelecting the Right Slot Sample Logicmaster Configuration Screen ConfigurationBattery Status LED is not on Steady Chapter TroubleshootingSerial Communication Problems Communications Problems with Another Serial Device Communications Problems with ECLiPS or OnTOPChapter SerialCommunications Programming Serial Communications ECLiPSor OnTOP Options Serial Port SetupProgrammable Setup Options Serial Port Parameters Mini Converter Kit Serial CableRTS CTS DTR GND PCM Other Cable OptionsCustom Made Cables No Connection Signal GroundWYE Cable Connections for Series 90-30 SLP HardwareSpecifications Chapter SpecificationsFirmware Specifications SLP I/O and Register Specifications