Key to J2 wiring block on TS0862:
EG = Egress.
+= 5V power supply, red wire.
0V | = | LAN Ground — 0V connection, black wire. |
D0 | = | Data 0 — Clock connection to Reader, green wire. |
D1 | = | Data 1 — Data connection to Reader, white wire. |
L1 | = | LED 1 — Reader green LED, brown wire. |
|
| See Door Data Menu. |
L2 | = | LED 2 — Reader red LED, orange or yellow wire. See Door Data |
|
| Menu. |
BZ | = | Buzzer — Reader beeper, blue wire. |
Figure 1 Connecting the TS0861 Magnetic Swipe Card Reader to the wiring block on the TS0862 Smart Door Controller
4 | TS0861 Magnetic Swipe Card Reader Installation Guide |