IR REMOTE CONFIGURATION
Resolving IR Code Conflicts
In the event that IR commands from other remote controls conflict with the supplied IR remote control unit, changing the remote channel will alleviate this issue. The IR remote control unit has a bank of DIP switches for setting the remote IR channel.
The DIP Switch bank on the IR remote control unit is located underneath the battery cover.
DIP Switches
It is important that the IR channel selected on the remote, match the IR channel on the GefenTV 4x1 Switcher for HDMI 1.3 for proper operation. For example, if you set both DIP switches on the remote to the down position (toward the “1” and “2”), IR channel 0, you must set the GefenTV 4x1 Switcher for HDMI 1.3 to use IR channel 0.
Remote Channel 0: |
|
|
|
|
| Remote Channel 1: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| ||||||
Default |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
| 2 |
| 1 |
| 2 |
| ||||
|
|
|
|
|
|
|
|
|
|
| |
Remote Channel 2: |
|
|
|
|
| Remote Channel 3: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
| 2 |
| 1 |
| 2 |
| ||||
See page 9 for information on how to change the IR channel on the GefenTV 4x1 Switcher for HDMI 1.3.
8