Manually Configuring Network Settings
Table of Contents | sections | 1 | 2 | 3 |
Manually Configuring Network Adapters in Mac OS X v10.x
1.Click on the “System Preferences” icon.
2.Select “Network” (1) from the “System Preferences” menu.
(1)
4 | 5 | 6 | 7 | 8 | 9 | 10 |
3.Next to “Configure” (2), if “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
(2)
(3)
(5)
(4)
4.Select the “TCP/IP” tab (3). Next to “Configure:” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab
(5) to make sure that “Connect using PPPoE” is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password.
Enhanced Wireless Modem Router | 73 |
