Manually Configuring Network Settings
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
5.If “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
6.If not already selected, select “Using DHCP” next to “Configure:”
(4), then click “Apply Now”.
Your network adapter(s) are now configured for use with the Router.
(3)
(5)
(4)
Enhanced Wireless Modem Router | 74 |
