Belkin F6D4630-4 user manual IP assigned by ISP

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

5.IP assigned by ISP

1)For the Dynamic IP connection - Select “Yes” if your ISP instructed you to use Dynamic IP.

2)For the Static IP connection - Select “No” if your ISP instructed you to use Static IP.

-IP Address - Enter an IP address assigned by your ISP for the Router WAN interface.

6.VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP).

7.Encapsulation - Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer.

VC-MUX:PPPoA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads.

LLC: PPPoA Logical Link Control allows multiple protocols running over one virtual circuit (more overhead).

8.MTU – Enter the MUT value for your ISP.

9.Disconnect after of x minutes of no activity – Checking the box and enter the number of minute that you want the modem router to auto disconnect after no activity. After this time has been exceeded, the connection will be terminated.

Click “Apply Changes” to save and activate your settings. To go back to the original settings before saving, click “Clear Changes”. Or click any of the Quick-Navigation links for other options. Your new settings will not be saved unless your click “Apply Changes”.

Enhanced Wireless Modem Router 34