Belkin F6D4630-4 Using the Web-Based Advanced User Interface, sections, For Static IP connection

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

For Static IP connection:

1.IP assigned by ISP – Select “No” if your ISP instructed you to use fixed IP.

2.IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.

3.Subnet Mask – Enter a subnet mask assigned by your ISP.

4.Default Gateway – Enter a default gateway IP address assigned by your ISP.

5.VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameters here. These identifiers are assigned by your ISP.

6.Encapsulation – Select the LLC or VC MUX your ISP uses.

Click “Apply Changes” to save and activate your settings. To go back to the original settings before saving, click “Clear Changes”. Or click any of the Quick-Navigation links for other options. Your new settings will not be saved unless your click “Apply Changes”.

Setting your ISP Connection Type to Static IP (IPoA)

This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet.

Enhanced Wireless Modem Router 36