OPERATION NOTES
READTHESENOTESBEFOREINSTALLINGOR
OPERATINGTHETSE100SYSTEM.
1.WARNING!: TheTSE100 weredesignedtooperate on Macintosh computers. Do not attempt to use this equipment with any other type computers.
2.The TSE100S is shipped with monitor switch setting for 640X480 resolution. For details on how to change the default setting, refer to page 11.
3.WARNING!: When usingalocal keyboardnot extended with the TSE100S unit, use the Gefen modified ADB cable. Modified cable is connected between the TSE100S sender and the local keyboard or mouse.
3.WARNING!: When plugging in a TSE100 Sender unit ONLY, without theTSE100 receiver unit, the keyboard and mouse will freeze. The TSE100 Receiver unit must be connected, and powered up, and the link cable installed between both units, in order to operate property.
4.When using the TSE100 with two monitors, one extended and one local, both monitors MUST be the same type. If the monitors are different, they will not initialize correctly.
5.Link Cable: Refer to the wiring diagram on page 10 for wiring instructions.
2