Fortinet 50A/50B, 100 manual Adding an override server, To add an override server using the CLI

Configuring the FortiGate unit Next steps

Example

config system autoupdate schedule set update every Sunday set frequency weekly

set status enable set time 16:45

end

Adding an override server

If you cannot connect to the FDN, or if your organization provides updates using their own FortiGuard server, use the following procedures to add the IP address of an override FortiGuard server in either the web-based manager or the CLI.

To add an override server from the web-based manager

1Go to System > Maintenance > FortiGuard Center.

2Select the blue arrow for AntiVirus and IPS Downloads to expand the options.

3Select the Use override server address check box.

4Type the fully qualified domain name or IP address of a FortiGuard server.

5Select Apply.

The FortiGate unit tests the connection to the override server.

If the FDN setting changes to available, the FortiGate unit has successfully connected to the override server.

If the FDN stays set to not available, the FortiGate unit cannot connect to the override server. Check the FortiGate configuration and network configuration for settings that would prevent the FortiGate unit from connecting to the override FortiGuard server.

To add an override server using the CLI

1Log into the CLI.

2Enter the following command:

config system autoupdate override set address

set status

end

FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide	49
01-30004-0265-20070831