Eizo FS2332 user manual Setting Procedures Perform the auto adjustment

Page 24

Setting Procedures

1. Perform the auto adjustment.

●●To adjust flickering, screen position, and screen size automatically “Auto Screen Adjust”

Procedure

1.Choose “Screen” in the Setting menu, and press .

2.Choose “Auto Screen Adjust” in the “Screen” menu, and press .

3.Select “Yes” with or , and press .

Flickering, screen position, and screen size are corrected by the auto-adjustment function.

If the screen is not displayed correctly even after performing “1. Perform the auto adjustment.” (page 24), perform the adjustments according to the procedures on the following pages. If the screen is displayed correctly, go to “5. Adjusting color gradation.” (page 26).

2.Prepare to use analog screen adjustment patterns.

Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”.

Note

•For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file.

3.Perform the auto adjustment again with the analog screen adjustment pattern displayed.

●●To adjust flickering, screen position, and screen size automatically “Auto Screen Adjust”

Procedure

1.Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern files”.

2.Choose “Screen” in the Setting menu, and press .

3.Choose “Auto Screen Adjust” in the “Screen” menu, and press .

4.Select “Yes” with or , and press .

Flickering, screen position, and screen size are corrected by the auto-adjustment function.

If the screen is not displayed correctly even after performing “3. Perform the auto adjustment again with the analog screen adjustment pattern displayed.” (page 24), perform the adjustments according to the procedures on the following pages. If the screen is displayed correctly, go to “5. Adjusting color gradation.” (page 26).

24 Chapter 2 Adjusting Screens

Image 24

Contents Page Location of Caution Statement For USA-California OnlyPage Cleaning To use the monitor comfortablyContents Limited Warranty Features IntroductionControls and Functions MonitorBefore Using Remote Control How to install battery Receivable Range of Remote ControlDisk contents and software overview Eizo LCD Utility DiskTo use ScreenManager Pro for LCDDDC/CI/EIZO ScreenSlicer Displaying the Setting menu Adjusting/SettingBasic operation of the Setting menu Basic Operations and FunctionsMain menu Setting Reference FunctionsAdjusting Screens Compatible Resolutions/FormatsDigital Input DVI-D, Hdmi PC signal Digital Input Hdmi video signalSetting the Resolution WindowsWindows Vista Windows XPAdjusting Color To select the display mode Color ModeProcedure Display Modes PurposeTo perform advanced adjustments Adjustable settings in each modeColor Mode FunctionTo adjust brightness Brightness To adjust black level Black LevelTo adjust contrast Contrast Adjustable range ProcedureTo adjust the color saturation Saturation To adjust hue HueAdjustable range To adjust color temperature Temperature To adjust gamma Gamma To adjust gain GainTo set ContrastEnhancer ContrastEnhancer To adjust the clarity of the image Smart Resolution Still images show the same visual impressionsScreen Adjustment Digital Signal InputAnalog Signal Input To set overdrive intensity OverdriveSetting Procedures Perform the auto adjustment Prepare to use analog screen adjustment patternsTo remove flickering or blurring Phase To eliminate vertical bars ClockAdjusting color gradation To adjust color gradation automatically Auto Range AdjustTo correct the screen position Position Analog Input D-Sub/Digital Input DVI-D, Hdmi PC signal Setting FunctionScreen Size Changing Modify blurred characters or linesSetting Function Screen Display To set the screen ratio OverscanSetting Monitor Adjusting VolumeSwitching sound source for Hdmi signal input Source To turn the volume up/downTo adjust the sound level Sound Level Enabling/Disabling DDC/CI communication DDC/CILocking Buttons Key Lock Setting the Eizo Logo Display Logo Setting Language LanguageChanging the authentication method for Hdmi signal input Method Input port Signal ErrorResetting the Monitor to the Default Settings To reset the color adjustments Color ResetTo reset all adjustments to the default settings Reset Power Saving Functions Setting Power Saving Power SaveMonitor Setting Power Indicator Power Indicator Exiting the power saving modeAudio Output Checking the power saving level Enabling/Disabling Auto Power-OFF Off Timer minCancelling procedure Time extension procedureChecking the remaining time Connecting Cables Connecting Multiple External DevicesTo switch among input signals Connection examplesTroubleshooting Problem Possible cause and remedyImaging problems for both digital and analog Imaging problems for analog only Other problems How to Attach the Optional Arm ReferenceAttach the arm or stand to the monitor Attaching the Stand base Displaying Monitor Information InformationSpecifications Main Default Settings Outside Dimensions AccessoriesGlossary Phase Range AdjustmentResolution TemperaturePreset Timing Following table shows factory preset analog signal timingAppendix TrademarkLicense TCO FCC Declaration of ConformityHinweis zur Ergonomie Limited Warranty Limited WarrantyBegrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书 China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识3rd Edition-December