4.Choose “Screen” from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
●●To eliminate vertical bars “Clock”
Procedure
1.Choose “Clock” in the “Screen” menu, and press 
.
The “Clock” menu appears.
2.Adjust the clock with 
or 
to eliminate vertical bars.
Press 
or 
slowly so as not to miss the adjustment point.
3.Press 
to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to “Phase” to remove flickering or blurring.
●●To remove flickering or blurring “Phase”
Procedure
1.Choose “Phase” in the “Screen” menu, and press 
.
The “Phase” menu appears.
2.Adjust the phase with 
or 
to minimize flickering or blurring.
3.Press 
to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars “Clock””. (Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
Chapter 2 Adjusting Screens 25