Attention
•When all the conditions below are met, the monitor does not change to the power saving mode even if “Power Save” is set to “Enable”:
-“Power Save” for Sound is set to “Sound On” (“Audio Output” (page 34))
-In the mute state (“To mute the sound temporarily” (page 29))
In these cases, reset the mute.
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display mode.
●●Audio Output
This monitor allows you to turn off the audio output from the speakers/headphone at the power saving mode.
Procedure
1.Choose “Sound” in the Setting menu, and press 
.
2.Choose “Power Save” in the “Sound” menu, and press 
.
The “Power Save” menu appears.
3.Select “Sound On” or “Sound Off” with 
or 
.
4.Press 
to exit the adjustment.
Attention
•No audio is output while the monitor is in the Power Saving mode, if the HDMI signal is input or the sound source is of HDMI.
4-2. Setting Power Indicator “Power Indicator”
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1.Choose “Monitor Settings” in the Setting menu, and press 
.
2.Choose “Power Indicator” in the “Monitor Settings” menu, and press 
.
The “Power Indicator” menu appears.
3.Select “Enable” or “Disable” with 
or 
.
4.Press 
to exit the adjustment.
34 Chapter 4 Power Saving Functions