Eizo CG241W manual Screen Adjustment, Adjustment Procedure Press on the control panel

Page 15

3. Screen Adjustment and Settings

3-2. Screen Adjustment

NOTE

•Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.

The monitor displays the digital input image correctly based on its pre-setting data.

Analog Input

Screen adjustments for the LCD monitor should be used in suppressing screen ﬂickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when ﬁrst installing the display or whenever changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the set-up procedure is provided.

Adjustment Procedure

1Press on the control panel.

The message "Your setting will be lost if you press again now." appears and remains on the screen for 5 seconds. While the message is on the screen, press the Auto Adjustment button again to automatically adjust the clock, phase, screen position and resolution. If you do not wish to do adjust the screen, do not press again.

NOTE

•The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC running Windows. It may not work properly in either of the following cases. When running an AT-compatible PC on MS-DOS (Not windows). The background color for the "wall paper" or "desktop" pattern is set to black.

•It cannot work correctly using with some graphics cards.

If the appropriate screen cannot be made by using , adjust the screen through the following procedures. If the appropriate screen can be made, proceed to 4. Range Adjustment .

2Run the "Screen Adjustment Program".

Having read the "Readme.txt" ﬁle, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.)

Tips

•If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram on the following.

15

Image 15

Contents APPENDIX/ANHANG/ANNEXE Safety Symbols Keep small objects or liquids away from the unit Refer all servicing to qualiﬁed service personnelLocation of the Caution Statements Do not open the cabinet or modify the unitPlace the unit at the strong and stable place To disconnect the power cord, grasp the plug ﬁrmly and pullHandle the power cord with care Never touch the plug and power cord if it begins to thunderDo not touch a damaged LCD panel directly with bare hands Use an easily accessible power outletPeriodically clean the area around the plug Unplug the unit before cleaning itLCD Panel Introduction FeaturesIndicator status Operation status Buttons and IndicatorsDisk contents and software overview Utility DiskTo use ColorNavigator CE or UniColor Pro Connecting Two PCs to the Monitor Selecting input signalConnection examples Priority setting Performance Required system environment Making Use of USB Universal Serial BusExiting the ScreenManager Making Adjustments and SettingsBasic Operation and Functions Entering the ScreenManagerMain menu Sub menu Reference FunctionsScreen Adjustment Adjustment Procedure Press on the control panelRun the Screen Adjustment Program Adjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal Color Adjustment of the Mode Settings Color AdjustmentTo select FineContrast mode FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Adjustment ItemsBrightness To set the brightness of the screen ~100% Power Resumption Procedure Power-save SetupProcedure Power Saving SystemHow to unlock Off TimerLocking the settings How to lockAutomatic brightness adjustment Power Indicator SettingSmooth the blurred texts of the enlarged screen Displaying Lower ResolutionsEnlarge the screen size when displaying a low resolution Mode FunctionTo display Setting the orientation of the Adjustment menuEizo Logo Appearing Function To undisplayProblems Possible cause and remedy TroubleshootingPosition adjustment Refer to the manual of the PC Attach an arm stand to the LCD monitor securely Attaching an armRestart the computer if the settings have been changed Environmental Settings Digital signals onlyCleaning CabinetLCD Panel USB SpeciﬁcationsDefault settings Beeper settingsDimensions Pin No Signal Signal RemarksPin Assignment Glossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie