Eizo CG241W manual Adjustment Items, Icons Functions FineContrast Mode Custom SRGB

Page 19

3. Screen Adjustment and Settings

Advanced Adjustments[Adjustment menu]

Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the Adjustment menu.

In the analog input, perform the "Range Adjustment" before making the color adjustments. During color adjustments, the FineContrast mode cannot be changed. Select the mode in advance by

using

Adjustment Items

The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast mode.

" √ ": Settable/Adjustable " - ": Fixed at the factory

Icons	Functions		FineContrast Mode
		Custom	sRGB	EMU	CAL
	Brightness*	√	√	-	-

	Temperature*	√	-	-	-

	Gamma*	√	-	-	-

	Saturation	√	-	-	-

	Hue	√	-	-	-

	Gain	√	-	-	-

	6 colors	√	-	-	-

	Reset	√	-	-	-

*These settings can be also adjusted on the FineContrast menu. (See FineContrast.)

NOTE

•Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allowthe monitor to warm up for at least 30 minutes before making adjustments.)

•The values shown in percentages represent the current level within the speciﬁc adjustment. They areavailable only as a reference tool. (To create a uniform white or black screen, the percentages for eachwill probably not be the same.)

19

Image 19

Contents APPENDIX/ANHANG/ANNEXE Safety Symbols Keep small objects or liquids away from the unit Refer all servicing to qualiﬁed service personnelLocation of the Caution Statements Do not open the cabinet or modify the unitPlace the unit at the strong and stable place To disconnect the power cord, grasp the plug ﬁrmly and pullHandle the power cord with care Never touch the plug and power cord if it begins to thunderDo not touch a damaged LCD panel directly with bare hands Use an easily accessible power outletPeriodically clean the area around the plug Unplug the unit before cleaning itLCD Panel Introduction FeaturesIndicator status Operation status Buttons and IndicatorsUtility Disk Disk contents and software overviewTo use ColorNavigator CE or UniColor Pro Selecting input signal Connecting Two PCs to the MonitorConnection examples Priority setting Performance Required system environment Making Use of USB Universal Serial BusExiting the ScreenManager Making Adjustments and SettingsBasic Operation and Functions Entering the ScreenManagerMain menu Sub menu Reference FunctionsAdjustment Procedure Press on the control panel Screen AdjustmentRun the Screen Adjustment Program Adjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal Color Adjustment of the Mode Settings Color AdjustmentTo select FineContrast mode FineContrast ModeIcons Functions FineContrast Mode Custom SRGB Adjustment ItemsBrightness To set the brightness of the screen ~100% Power Resumption Procedure Power-save SetupProcedure Power Saving SystemHow to unlock Off TimerLocking the settings How to lockAutomatic brightness adjustment Power Indicator SettingSmooth the blurred texts of the enlarged screen Displaying Lower ResolutionsEnlarge the screen size when displaying a low resolution Mode FunctionTo display Setting the orientation of the Adjustment menuEizo Logo Appearing Function To undisplayProblems Possible cause and remedy TroubleshootingPosition adjustment Refer to the manual of the PC Attach an arm stand to the LCD monitor securely Attaching an armRestart the computer if the settings have been changed Environmental Settings Digital signals onlyCabinet CleaningLCD Panel USB SpeciﬁcationsBeeper settings Default settingsDimensions Signal Remarks Pin No SignalPin Assignment Glossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie