Eizo CG241W manual Do not touch a damaged LCD panel directly with bare hands

Page 5

PRECAUTIONS

WARNING

When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely.

Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in ﬁre or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.

If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor.

Lamps contain mercury, dispose according to local, state or federal laws.

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

• Do not place any objects on the ventilation slots.

•Do not install the unit in a closed space.

•Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airﬂow and may result in ﬁre, electric shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in ﬁre.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation.

5

Image 5

Contents APPENDIX/ANHANG/ANNEXE Safety Symbols Location of the Caution Statements Refer all servicing to qualiﬁed service personnelDo not open the cabinet or modify the unit Keep small objects or liquids away from the unitHandle the power cord with care To disconnect the power cord, grasp the plug ﬁrmly and pullNever touch the plug and power cord if it begins to thunder Place the unit at the strong and stable placePeriodically clean the area around the plug Use an easily accessible power outletUnplug the unit before cleaning it Do not touch a damaged LCD panel directly with bare handsLCD Panel Introduction FeaturesIndicator status Operation status Buttons and IndicatorsTo use ColorNavigator CE or UniColor Pro Disk contents and software overviewUtility Disk Connection examples Connecting Two PCs to the MonitorSelecting input signal Priority setting Performance Required system environment Making Use of USB Universal Serial BusBasic Operation and Functions Making Adjustments and SettingsEntering the ScreenManager Exiting the ScreenManagerMain menu Sub menu Reference FunctionsRun the Screen Adjustment Program Screen AdjustmentAdjustment Procedure Press on the control panel Adjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal To select FineContrast mode Color AdjustmentFineContrast Mode Color Adjustment of the Mode SettingsIcons Functions FineContrast Mode Custom SRGB Adjustment ItemsBrightness To set the brightness of the screen ~100% Procedure Power-save SetupPower Saving System Power Resumption ProcedureLocking the settings Off TimerHow to lock How to unlockAutomatic brightness adjustment Power Indicator SettingEnlarge the screen size when displaying a low resolution Displaying Lower ResolutionsMode Function Smooth the blurred texts of the enlarged screenEizo Logo Appearing Function Setting the orientation of the Adjustment menuTo undisplay To displayProblems Possible cause and remedy TroubleshootingPosition adjustment Refer to the manual of the PC Attach an arm stand to the LCD monitor securely Attaching an armRestart the computer if the settings have been changed Environmental Settings Digital signals onlyLCD Panel CleaningCabinet USB SpeciﬁcationsDimensions Default settingsBeeper settings Pin Assignment Pin No SignalSignal Remarks Glossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie